Citation:
Liu Yingying, Yun Peng. Research on Technology Application Routes for Airport Design Optimization Based on Flight Visual Simulation Technology and BIM Technology. Journal of Information Technologyin Civil Engineering and Architecture,
2020, 12(3): 83-88.
doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.13
2020, 12(3): 83-88. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.13
Research on Technology Application Routes for Airport Design Optimization Based on Flight Visual Simulation Technology and BIM Technology
China Aviation Planning and Design Insititute (Group) Co., Ltd., Beijing 100120, China |
The visual simulation technology is an important branch of computer simulation technology, which can provide the users with scientific and effective technical means for evaluation of the design results by simulating the real environment. For the airport design, although the popularized logic calculation simulation is able to be used for quantitative analysis, it is still limited by the accuracy of the model and non-intuitiveness, with many difficulties in integrating the BIM design model, which faces many obstacles in carrying out deeper level, wider field, and wider range of technical research and application. Therefore, this paper explores a set of technical route to apply flight visual simulation technology and BIM technology to airport design optimization. The technical route is not only able to support BIM design model and GIS information to build real simulation environment, but also able to implement the real simulation and experience of planning and design results with aircraft as the main body, realizing the verification of flight procedures, which provides strong support for the display and evaluation of design results
| [1] | |
| [2] |
陈芊.计算机仿真在机场飞行区规划设计中的应用[J].中国科技信息, 2013(17): 113-115.doi: 10.3969/j.issn.1001-8972.2013.17.068 |
| [3] |
韩文波, 陈瀚超.基于VEGAPRIME战斗机飞行视景仿真系统研究[J].长春理工大学学报(自然科学版), 2017, 40(6): 28-31+37.doi: 10.3969/j.issn.1672-9870.2017.06.007 |
| [4] |
Saunders J, Beard R. UAS Flight Simulation with Hardware-in-the-loop Testing and Vision Generation[M]. 2010. |
| [5] |
Daniec K, Pawel Iwaneczko, Karol Jedrasiak, et al. Prototyping the Autonomous Flight Algorithms Using the Prepar3D Simulator[M]. Vision Based Systems for UAV Applications. 2013. |
| [6] |
张燕燕, 黄其涛, 韩俊伟, 等.飞行模拟器视景系统的设计与实现[J].系统仿真学报, 2009, 21(12): 3662-3667. |
| [7] |
Studies on Virtual Flight Test-Certification Framework Components for Reliable Aerospace Vehicle Simulation[C]. KSAS 2016 Fall Conference, 2016. |
| [8] |
司海青, 汪海波, 丁松滨, 等.基于PREPAR3D的飞行原理教学实验平台建设[J].实验技术与管理, 2019, 36(10): 269-272. |
| [9] |
薛鹏.基于PREPAR3D的虚拟仿真技术在民航机务实践教学中的应用[J].科技资讯, 2017, 15(18): 161-163+165. |
| [10] |
Mariusz Domzal, Karol Jedrasiak, Pawe? Iwaneczko, et al. UAV Swarm Management Using Prepar3D[M]//Advanced Technologies in Practical Applications for National Security. 2018. |
| [11] |
宋一鑫.基于Prepar3D的飞行程序模拟应用初探[J].机场建设, 2015(4): 33-35. |
| [12] | |
| [13] |
DATA LINK COMMUNICATION INTERFACE WITH FLIGHT SIMULATOR IN FORM OF A CPDLC[D]. California: American Institute of Aeronautics and Astronautics. |
| [14] |
王超.飞行程序运行评估的理论方法及仿真应用研究[D].南京航空航天大学, 2012. |
Metrics
- PDF Downloads(35)
- Abstract views(1910)
- HTML views(1100)
