Citation:
Jiao Ke, Yang Yuanfeng, Zhou Kaixuan, Chen Jianjia, Yang Xin. Research on Whole Process Structure Design based on BIM Technology. Journal of Information Technologyin Civil Engineering and Architecture,
2015, 7(5): 1-7.
doi: 10.16670/j.cnki.cn11-5823/tu.2015.05.01
2015, 7(5): 1-7. doi: 10.16670/j.cnki.cn11-5823/tu.2015.05.01
Research on Whole Process Structure Design based on BIM Technology
| 1. | Architectural Design and Research Institute of Guangdong Province, Guangzhou 510010, China |
| 2. | Faculty of Civil and Transportation Engineering, Guangdong University ofTechnology, Guangzhou 510006, China |
Due to low efficiency and unreasonable work flow in BIM practice, civil engineers encounter difficulties during the transformation from traditional 2D design to 3D parametric design. This paper conducts an in-depth research on these two problems, finds out solutions and works out a lot of assisted plugins, which increases the efficiency of building BIM model, solves the cooperation problem of multi-specialty under Revit platform, and finally realizes the whole process design of BIM.
| [1] |
刘济瑀. 勇敢走向BIM2. 0[M]. 第1版. 中国建筑工业出版社, 2015年3月. |
| [2] |
欧特克公司. Autodesk Revit 2014帮助文档, 2014 |
| [3] |
何波. Revit与Navisworks实用疑难200问[M].第1版.中国建筑工业出版社, 2015年4月. |
| [4] | |
| [5] |
GB50007-2011, 建筑地基基础设计规范[S]. 北京: 中国建筑工业出版社, 2011. |
| [6] |
GDA0001-2009, 建筑工程CAD制图标准-广东省建筑设计研究院标准[S]. 广东省建筑设计研究院, 2009. |
Metrics
- PDF Downloads(19)
- Abstract views(1690)
- HTML views(922)
