2017, 9(4): 106-110. doi: 10.16670/j.cnki.cn11-5823/tu.2017.04.20
BIM技术在钢桁架梁桥设计阶段的应用
上海市政工程设计研究总院集团第六设计院有限公司, 合肥 230001 |
Application of BIM Technology in Design Phase of Steel Trussed Girder Bridge
Shanghai Municipal Engineering Design Institute (Group) Sixth Design Institute Co., Ltd., Hefei 230001, China |
引用本文:
王继红, 卢禹. BIM技术在钢桁架梁桥设计阶段的应用[J]. 土木建筑工程信息技术,
2017, 9(4): 106-110.
doi: 10.16670/j.cnki.cn11-5823/tu.2017.04.20
Citation:
Wang Jihong, Lu Yu. Application of BIM Technology in Design Phase of Steel Trussed Girder Bridge[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2017, 9(4): 106-110.
doi: 10.16670/j.cnki.cn11-5823/tu.2017.04.20
摘要:将BIM技术引入到钢桁架梁桥的设计中，从桁架定位，单个复杂节点的设计，节点与节点之间的搭接等方面对设计进行了指导，并开展了碰撞检查，拼装模拟、工程量计算等方面的应用，收到了良好的效果，为BIM技术在钢桁架梁桥设计的应用提供了参考。
Abstract: This paper introduces the BIM technology into the design of steel trussed girder bridge, which directs the design in the truss positioning, single complex node designing, overlapping between adjacent nodes, and etc. The collision detection is also implemented, as well as the BIM application in assembly simulation and quantity calculation. The application of BIM technology has received good results, and provides references for future BIM applications in the design of steel trussed girder bridge.
| [1] |
刘飞虎.基于CATIA高级知识工程在BIM桥梁钢筋建模中的应用[J].土木建筑工程信息技术, 2015, 7(3):43-47. |
| [2] |
胡挺, 吴立军.CATIA二次开发技术基础[M].北京:电子工业出版社. 2006. |
| [3] |
崔建华, 甘明, 李华峰. 钢结构节点的BIM技术应用[C]. 空间结构学术会议. 2012. |
| [4] |
DSYAutomation.chm[M].Dassault Systèmes SolidWorks Corp. 2016. |
| [5] |
王继红.基于CATIA的桥梁BOM自动生成方法的研究[J].土木建筑工程信息技术, 2014, 05:34-37.doi: 10.3969/j.issn.1674-7461.2014.05.007 |
| [6] |
代忠权.BIM技术在钢桥工程的应用研究[J].价值工程, 2015, 08:130-131.doi: 10.3969/j.issn.1006-4311.2015.01.067 |
| [7] |
宋红飞, 常顺志, 梁善国, 等.BIM技术在钢桥制造中的应用研究方向探讨[J].铁路技术创新, 2014, 02:60-62. |
计量
- PDF下载量(24)
- 文章访问量(2247)
- HTML全文浏览量(690)
