• ISSN: 1674-7461
  • CN: 11-5823/TU
  • 主管:中国科学技术协会
  • 主办:中国图学学会
  • 承办:中国建筑科学研究院有限公司

2020, 12(3): 72-78. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.11

信息技术在构件生产阶段的应用与展望

南京林业大学 土木工程学院,南京 210037

通讯作者: 李希胜,

网络出版日期: 2020-06-01

作者简介: 周垚(1996-),女,硕士研究生,主要研究方向:BIM技术研究与应用

Application and Prospect of Information Technology in Component Manufacturing Stage

College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China

Corresponding author: Li Xisheng,

Available Online: 2020-06-01

引用本文: 周垚, 李希胜. 信息技术在构件生产阶段的应用与展望[J]. 土木建筑工程信息技术, 2020, 12(3): 72-78. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.11

Citation: Zhou Yao, Li Xisheng. Application and Prospect of Information Technology in Component Manufacturing Stage[J]. Journal of Information Technologyin Civil Engineering and Architecture, 2020, 12(3): 72-78. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.11

摘要:将信息技术与构件生产相结合是近年来的研究热点。尽管这些研究已经极大地推动了企业信息化的发展,但还缺少一个关键性分析来总结研究成果、识别研究空白。为此,本文梳理了预制构件的生产过程,将其分为深化设计、生产计划、生产制造以及存储运输四个阶段,并针对各阶段的研究成果进行定性分析,总结了研究不足。最后,针对性地提出基于BIM与本体的构件自动拆分、动态扰动管理、智能供应链、装配式构件信息交付手册等未来可能的研究方向。

关键词: 预制构件, 生产阶段, 信息技术, 综述
[1]

蒋慧, 李希胜.基于BIM的建筑结构协同设计关键问题研究[J].森林工程, 2018, 34(6): 102-108. 

[2]

王军, 李希胜, 刘勤文.基于Dynamo的绿色建筑方案设计优化[J].土木建筑工程信息技术, 2019, 11(3): 121-127. 

[3]

刘勤文, 李希胜, 王军.以装配率为导向的装配式建筑方案设计优化[J].土木建筑工程信息技术, 2019, 11(2): 122-128. 

[4]

王飞鹏, 吴涛, 刘喜, 等.基于BIM技术的装配式剪力墙结构研究[J].施工技术, 2019, 48(6): 21-24+88. 

[5]

靳鸣, 方长建, 李春蝶. BIM技术在装配式建筑深化设计中的应用研究[J].施工技术, 2017, 46(16): 53-57. 

[6]

冯青, 陆小龙, 汪德江, 等.基于BIM的装配整体式混凝土梁的拆分研究[J].土木建筑工程信息技术, 2016, 8(5): 83-85. 

[7]

刘春原, 许晓文, 付素娟.部分装配式框架结构自动拆分办法[J].河北工业大学学报, 2018, 47(1): 103-109. 

[8]

Khalili A, Chua D K H.IFC-based framework to move beyond individual building elements toward configuring a higher level of prefabrication[J]. Journal of Computing in Civil Engineering, 2012, 27(3): 243-253. 

[9]

Wang Z, Hao H. Dynamic response to demand variability for precast production rescheduling with multiple lines[J]. International Journal of Production Research, 2018, 1-16. 

[10]

Ko C H, Wang S F. GA-based decision support systems for precast production planning[J]. Automation in Construction, 2010, 19(7): 907-916. 

[11]

Ko C H, Wang S F. Precast production scheduling using multi-objective genetic algori-thms[J]. Expert Systems with Applications, 2011, 38(7): 8293-8302.

[12]

Li S H A, Tserng H P, yin S Y L, et al. A production modeling with genetic algorithms for a stationary pre-cast supply chain[J]. Expert Systems with Applications, 2010, 37(12): 8406-8416. 

[13]

Chen J H, Yang L R, Tai H W. Process reengineering and improvement for building precast production[J]. Automation in Construction, 2016, 68: 249-258. 

[14]

Wang Z, Hu H, Gong J.Framework for modeling operational uncertainty to optimize offsite production scheduling of precast components[J]. Automation in Construction, 2018, 86: 69-80. 

[15]

徐照, 占鑫奎, 张星. BIM技术在装配式建筑预制构件生产阶段的应用[J].图学学报, 2018, 39(6): 136-143. 

[16]

Bock T. Digital design and robotic production of 3D shaped precast components[C]//The 25th International Symposium on Automation and Robotics in Construction, Vilnius Lithuania. 2008, 11-21.

[17]

李永敢.装配式建筑预制混凝土构件自动化生产线设计配置技术[J].施工技术, 2018, 47(4): 47-51. 

[18]

刘建波, 王佳佳, 张礼华, 等.基于现场总线的PC构件码垛养护控制系研究[J].制造业自动化, 2018, 40(9): 34-37. 

[19]

Kim M K, Cheng J C P, Sohn H, et al. A framework for dimensional and surface quality assessment of precast concrete elements using BIm and 3D laser scanning[J]. Automation in Construction, 2015, 49: 225-238. 

[20]

yin S Y L, Tserng H P, Wang J C, et al. Developing a precast production management system using RFID technology[J]. Automation in Construction, 2009, 18(5): 677-691. 

[21]

马智亮, 杨之恬.基于BIM技术的预制构件生产管理系统框架研究[C].全国BIM学术会议, 2015.

[22]

董娜, 张宁, 赵雪媛, 等.基于BIM与RFID的工业化建筑构件进度管理研究[J].施工技术, 2018, 47(10): 5-10. 

[23]

Ergen E, Akinci B, Sacks R. Tracking and locating components in a precast storage yard utilizing radio frequency identification technology and GPS[J]. Automation in construction, 2007, 16(3): 354-367. 

[24]

Irizarry J, Karan E P, Jalaei F. Integrating BIm and GIS to improve the visual monitoring of construction supply chain management[J]. Automation in construction, 2013, 31: 241-254. 

[25]

Im K S, Han S H, Koo B, et al.Formulation of a pull production system for optimal inventory control of temporary rebar assembly plants[J]. Canadian Journal of Civil Engineering, 2009, 36(9): 1444-1458. 

[26]

Hong W K, Lee G, Lee S, et al. Algorithms for in-situ production layout of composite precast concrete members[J]. Automation in Construction, 2014, 41(5): 50-59. 

[27]

周雅莉, 胡珉, 喻钢.基于IFC标准的隧道工程信息传递研究[J].土木建筑工程信息技术, 2015, 7(6): 1-4. 

[28]

杨波.基于BIM的桥梁结构健康监测信息可视化研究[D].重庆交通大学, 2018.

[29]

Motamedi A, Soltani M M, Setayeshgar S, et al. Extending IFC to incorporate information of RFID tags attached to building elements[J]. Advanced Engineering Informatics, 2016, 30(1): 39-53. 

计量
  • PDF下载量(30)
  • 文章访问量(2007)
  • HTML全文浏览量(1136)
目录

Figures And Tables

信息技术在构件生产阶段的应用与展望

周垚, 李希胜

  • 版权所有© 《土木建筑工程信息技术》编辑部
  • 京ICP备17057008号
  • 地址:北京市朝阳区兴化路2号院1号楼
  • 电话:010-64517910 邮编:100013
  • 微信号:tmxxjs  QQ:342182902  E-mail:tmxxjs@163.com
本系统由北京仁和汇智信息技术有限公司设计开 技术支持: info@rhhz.net