2021, 13(3): 148-153. doi: 10.16670/j.cnki.cn11-5823/tu.2021.03.22
PC主体结构装配率智能计算方法研究
河北科技大学 建筑工程学院，石家庄 050000 |
Research on Intelligent Calculation Method of PC Main Structure Assembly Rate
College of Architectural Engineering, Hebei University of Science and Technology, Shijiazhuang 050000, China |
引用本文:
于佳鑫, 张学辉, 杨搏涛, 李鹏阳, 米大倩, 安军海. PC主体结构装配率智能计算方法研究[J]. 土木建筑工程信息技术,
2021, 13(3): 148-153.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.03.22
Citation:
Jiaxin Yu, Xuehui Zhang, Botao Yang, Pengyang Li, Daqian Mi, Junhai An. Research on Intelligent Calculation Method of PC Main Structure Assembly Rate[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2021, 13(3): 148-153.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.03.22
摘要:当前国内装配式建筑的装配率都是在设计阶段根据施工图纸按照相关规范进行人工计算，这种计算方式产生了大量的时间和人力的成本，且同一种计算思路，所得结果也不尽相同，正确率难以得到保证。鉴于此，本文提出了一种基于BIM的计算方法，以.Net Formwork4.7为框架采用C#语言，对BIM核心软件Revit进行二次开发，将《装配式建筑评价标准》以及规定的装配率计算方法编入插件中，通过建立构件自定义编码体系，识别并获取构件数据信息，来计算装配式预制混凝土(Precast Concrete，简称PC)的主体结构装配率。最后以实际工程项目为例，验证本方法的可行性。研究表明，通过这种方式大大减少计算时间与人力成本，并提高了精度。
Abstract: At present, the assembly rate of prefabricated buildings in China is calculated manually under relevant specifications according to construction drawings at the design stage. This kind of calculation generates a lot of time and labor costs. Moreover, the same calculation method has different results, and the accuracy is difficult to be guaranteed. In view of this, this paper proposes a calculation method based on BIM.With.Net Formwork4.7 as the framework, C# language was used to carry out secondary development of BIM core software Revit. And the assembly rate calculation method stipulated in the Prefabricated Building Evaluation Standard is incorporated into the plug-in, and the assembly rate calculation of the main structure is realized by establishing the component custom coding system, identifying and obtaining the component data information to calculate the assembly rate of main structure of Precast Concrete (PC). Finally, this paper uses a practical engineering project as an example to validate the feasibility of this method. The research shows that the calculation time and labor cost are greatly reduced and the precision is improved.
| [1] |
刘勤文, 李希胜, 王军. 以装配率为导向的装配式建筑方案设计优化[J]. 土木建筑工程信息技术, 2019, 11(2): 122-128. |
| [2] |
张艾荣. 《装配式建筑评价标准》解读[J]. 城市住宅, 2019, 26(1): 45-48.doi: 10.3969/j.issn.1006-6659.2019.01.009 |
| [3] |
赵为民, 古小英, 张超, 等. 装配式建筑评价方法对比研究[J]. 施工技术, 2018, 47(12): 10-16. |
| [4] |
GB/T51129-2017, 装配式建筑评价标准[S]. 北京: 中国建筑工业出版社, 2017. |
| [5] |
吴双月. 基于BIM的建筑部品信息分类及编码体系研究[D]. 北京交通大学, 2015. |
| [6] |
韩春楠. 基于BIM的装配式混凝土结构建筑预制装配率计算方法与应用框架研究[D]. 东南大学, 2018. |
| [7] |
Autodesk Asia Pte Ltd. 二次开发基础教程[M]. 同济大学出版社, 2015. |
| [8] |
邓玉辉. 基于Revit的装配式建筑装配率计算方法研究与应用[J]. 建材与装饰, 2019, 570(9): 80-81.doi: 10.3969/j.issn.1673-0038.2019.09.057 |
| [9] |
陈远, 康虹. 基于Revit二次开发的PC建筑预制率计算方法研究[J]. 土木建筑工程信息技术, 2018, 10(4): 12-16. |
| [10] |
李亚克, 于海丰, 王国鑫, 等. 基于Revit的管道放坡系统研究与实现[J]. 土木建筑工程信息术, 2019, 11(3): 128-133. |
计量
- PDF下载量(24)
- 文章访问量(1718)
- HTML全文浏览量(1167)
