Citation:
Duan Jin. Unstructured Mesh Generation of Shear-Wall Structures. Journal of Information Technologyin Civil Engineering and Architecture,
2010, 2(2): 57-62.
2010, 2(2): 57-62.
Unstructured Mesh Generation of Shear-Wall Structures
China Academy of Building Research (CABR), Beijing 100013, China |
This paper presents an new unstructured mesh generation method which is specially adapted to shear wall structures, making the discretization of the continuity more reasonable and enhancing the accuracy and reliability of the finite element analysis. Based on paving method and combining the mapping method and decomposition method, the meshing method developed in this paper can increase the quality and efficiency of automated mesh generation and meet the requirement of complicated structural analysis.
| [1] |
C.K. Lee, and S.H. Lo (1994). "A New Scheme for the Generation of a Graded Quadrilateral Mesh", Computers and Structures, Vol.52 pp. 847-857doi: 10.1016/0045-7949(94)90070-1 |
| [2] |
S.A. Canann, J.R. Tristano, and M.L. Staten (1998). "An Approach to Combined Laplacian and Optimization-Based Smoothing for Triangle, Quadrilateral, and Quad-Dominant Meshes", Proceedings, 7th International Meshing Roundtable |
| [3] |
S.J. Owen (1998). "A survey of unstructured mesh generation technology", Proceedings of the 7th International Meshing Roundtable, pp. 239-267 |
| [4] |
W.A. Cook, and W.R. Oakes (1982). "Mapping Methods for Generating Three-Dimensional Meshes", Computers in Mechanical Engineering, pp. 67-72 |
| [5] |
Timothy J. Tautges, , Shang-sheng Liu, Yong Lu, Jason Kraftcheck, Rajit Gadh, (1997)"Feature Recognition Applications in Mesh Generation", Trends in Unstructured Mesh Generation, ASME, AMD-Vol. 220, pp.117-121 |
| [6] |
J.Z. Zhu, O.C. Zienkiewicz, E. Hinton and J. Wu (1991). "A New Approach to the Development of Automatic Quadrilateral Mesh Generation, ", International Journal for Numerical Methods in Engineering, Vol.32 pp.849-866doi: 10.1002/(ISSN)1097-0207 |
| [7] |
Ted D. Blacker, and Michael B. Stephenson (1991). "Paving: A New Approach to Automated Quadrilateral Mesh Generation", International Journal for Numerical Methods in Engineering, Vol 32 pp.811-847doi: 10.1002/(ISSN)1097-0207 |
| [8] |
Roger J. Cass, Steven E. Benzley, Ray J. Meyers and Ted D. Blacker (1996). "Generalized 3-D Paving: An Automated Quadrilateral Surface Mesh Generation Algorithm", International Journal for Numerical Methods in Engineering, Vol. 39 pp.1475-1489doi: 10.1002/(ISSN)1097-0207 |
| [9] |
David R. White and Paul Kinney (1997). "Redesign of the Paving Algorithm: Robustness Enhancements through Element by Element Meshing, "Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp. 323-335 |
| [10] |
P. Kinney (1997). Cleanup: Improving quadrilateral finite element meshes. Proc. 6th. Int. Meshing Roundtable. |
| [11] |
J.A. Talbert, and A.R. Parkinson (1991). "Development of an Automatic, Two Dimensional Finite Element Mesh Generator using Quadrilateral Elements and Bezier Curve Boundary Definitions", International Journal for Numerical Methods in Engineering, Vol.29 pp.1551-1567 |
| [12] |
Dietrich, Nowottny (1997). "Quadrilateral Mesh Generation via Geometrically Optimized Domain Decomposition", Proceedings, 6th International Meshing Roundtable, pp.309-320 |
Metrics
- PDF Downloads(11)
- Abstract views(857)
- HTML views(712)
