2017, 9(4): 41-45. doi: 10.16670/j.cnki.cn11-5823/tu.2017.04.08
基于Revit的装配式建筑构件参数化钢筋建模方法研究与应用
广东省建筑设计研究院, 广州 510010 |
Research and Application of Parameterized Rebar Modeling for Prefabricated Building Component based on Revit
Architectural Design and Research Institute of Guangdong Province, Guangzhou 510010, China |
引用本文:
罗远峰, 焦柯. 基于Revit的装配式建筑构件参数化钢筋建模方法研究与应用[J]. 土木建筑工程信息技术,
2017, 9(4): 41-45.
doi: 10.16670/j.cnki.cn11-5823/tu.2017.04.08
Citation:
Luo Yuanfeng, Jiao Ke. Research and Application of Parameterized Rebar Modeling for Prefabricated Building Component based on Revit[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2017, 9(4): 41-45.
doi: 10.16670/j.cnki.cn11-5823/tu.2017.04.08
摘要:Revit环境下三维钢筋建模是困扰设计师进行装配式建筑构件深化设计的一大难点。本文分析了装配式建筑构件的钢筋排布规律, 研究装配式建筑构件参数化钢筋建模方法, 并基于该方法及Revit二次开发技术, 开发出一套辅助设计软件。通过工程应用验证了该方法能够有效减少手动绘制三维钢筋建模的工作量, 从而节省了时间和成本。本文方法可作为装配式建筑设计中三维钢筋快速建模参考。
Abstract: The 3D rebar modeling in Revit has been a difficult problem for the designers in the deepening design of prefabricated building component.This paper presents a parametric rebar modeling method for prefabricated building componentthrough the research on the arrangement ruleof rebar.Based on the rebar modeling method and Revit secondary development technology, a set of design-aided software is developed.It is proven through engineering applications that this method can effectively reduce the work load on rebar modeling, which saves a lot of time and money.This method can be used as a rapid modeling reference of 3D reinforced prefabricated construction design.
| [1] |
GB/T 51231-2016装配式混凝土建筑技术标准[S]. |
| [2] |
15G366-1-2015桁架钢筋混凝土叠合板(60mm厚底板)[S]. |
| [3] |
15G368-1-2015预制钢筋混凝土阳台板、空调板及女儿墙[S]. |
| [4] |
15G365-1-2015预制混凝土剪力墙外墙板[S]. |
| [5] |
15G365-2-2015预制混凝土剪力墙内墙板[S]. |
| [6] | |
| [7] |
计量
- PDF下载量(40)
- 文章访问量(2922)
- HTML全文浏览量(1171)
