2018, 10(2): 88-93. doi: 10.16670/j.cnki.cn11-5823/tu.2018.02.18
面向生产线级的PC构件排产模式研究
| 1. | 湖北工业大学计算机学院，武汉 430068 |
| 2. | 湖北工业大学土木建筑与环境学院，武汉 430068 |
Research on Production Arrangement Modes of PC Components for the Production Line
| 1. | School of Computer Science, Hubei University of Technology, Wuhan 430068, China |
| 2. | School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan 430068, China |
引用本文:
靳华中, 邹贻权, 朱振帆, 刘阳. 面向生产线级的PC构件排产模式研究[J]. 土木建筑工程信息技术,
2018, 10(2): 88-93.
doi: 10.16670/j.cnki.cn11-5823/tu.2018.02.18
Citation:
Jin Huazhong, Zou Yiquan, Zhu Zhenfan, Liu Yang. Research on Production Arrangement Modes of PC Components for the Production Line[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2018, 10(2): 88-93.
doi: 10.16670/j.cnki.cn11-5823/tu.2018.02.18
摘要:产能是反映预制构件工厂生产的关键指标之一，构件排产模式直接影响预制构件生产效率高低和产能的大小。本文针对自动化程度较高的外墙流水线，通过Anylogic模拟仿真实验，分析和计算自由节拍和固定节拍排产模式的PC构件产能，探讨不同排产模式的适用条件。
Abstract: The production capacity is one of the key indicators reflecting the factory producing prefabricated components, and the production arrangement mode of the components will have direct effects on the production efficiency and capability of prefabricated components. This paper applies the simulation experiment using Anylogic for the better automatized external wall prefabrication line, to analyze and calculate the productivity of PC components under the free-beat and fixed-beat production arrangement modes, respectively, and to discuss the applicable conditions for different production arrangement modes.
| [1] |
许杰峰, 鲍玲玲, 马恩成, 夏绪勇, 姜立.基于BIM的预制装配建筑体系应用技术[J].土木建筑工程信息技术, 2017, 8(4): 17-20. |
| [2] |
祁建, 霍光, 李宣.PC自动化生产线养护工艺及养护系统研究[J].混凝土世界, 2016(05): 84-87.doi: 10.3969/j.issn.1674-7011.2016.05.015 |
| [3] |
李应.装配式建筑构件生产工艺设计探讨[J].混凝土与水泥制品, 2017(12): 65-68.doi: 10.3969/j.issn.1000-4637.2017.12.016 |
| [4] |
孙红, 孙健, 吴玉厚, 赵凯军.大型智能PC构件自动化生产线简介[J].混凝土与水泥制品, 2015(03): 35-38.doi: 10.3969/j.issn.1000-4637.2015.03.009 |
| [5] |
单庆超, 张秀媛, 张朝峰.社会力模型在行人运动建模中的应用综述[J].城市交通, 2011, 9(7): 71-77. |
| [6] |
陈韶飞, 李弘, 夏文杰.基于Anylogic的商业银行排队系统仿真研究[J].科技通报, 2016, 32(08): 210-214.doi: 10.3969/j.issn.1001-7119.2016.08.048 |
计量
- PDF下载量(27)
- 文章访问量(2219)
- HTML全文浏览量(991)
