2015, 7(5): 102-106. doi: 10.16670/j.cnki.cn11-5823/tu.2015.05.18
基于Rhino+Grasshopper的异形曲面结构参数化建模研究
| 1. | 中南建筑设计院股份有限公司，武汉 430071 |
| 2. | 武汉大学土木建筑工程学院，武汉 430072 |
Research on Parametric Modeling Technique for Special-shaped Surface based on Rhino and Grasshopper
| 1. | Central-south China Architectural Design Institute Co., Ltd., Wuhan 430071, China |
| 2. | School of Civil Engineering of Wuhan University, Wuhan 430072, China |
引用本文:
张慎, 尹鹏飞. 基于Rhino+Grasshopper的异形曲面结构参数化建模研究[J]. 土木建筑工程信息技术,
2015, 7(5): 102-106.
doi: 10.16670/j.cnki.cn11-5823/tu.2015.05.18
Citation:
Zhang Shen, Yin Pengfei. Research on Parametric Modeling Technique for Special-shaped Surface based on Rhino and Grasshopper[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2015, 7(5): 102-106.
doi: 10.16670/j.cnki.cn11-5823/tu.2015.05.18
摘要:针对异形曲面结构建模的复杂性，采用参数化建模技术，以Rhino+Grasshopper为平台，对异形曲面结构参数化建模作相应研究，提出了一种可实现异形曲面结构参数化建模的方法。详细介绍了该参数化建模方法和具体步骤，结合三个实例对该建模方法的可行性进行了验证。
Abstract: The parametric modeling of special-shaped surface is complicated, and to solve this problem, this paper studies the parametric modeling of special-shaped surface based on Rhino and Grasshopper surface. A method to achieve the parametric modeling on special-shaped surface is proposed. The method and steps about how to build parametric models are elaborated in details. Finally, three cases are used to test the feasibility of this modeling method.
| [1] | |
| [2] | |
| [3] | |
| [4] | |
| [5] |
曾旭东, 王大川, 陈辉.Rhinoceros Grasshopper参数化建模[M].武汉:华中科技大学出版社, 2011. |
计量
- PDF下载量(38)
- 文章访问量(2038)
- HTML全文浏览量(2150)
