2016, 8(1): 87-91. doi: 10.16670/j.cnki.c.n11-5823/tu.2016.01.16
Revit管线自动标注方法的实现
西安建筑科技大学，西安 710000 |
Realization of Revit Pipeline Auto-labeling Method
Xi'an University of Architecture and Technology, Xi'an 710000, China |
引用本文:
李昌华, 李桐, 周方晓, 崔欢欢. Revit管线自动标注方法的实现[J]. 土木建筑工程信息技术,
2016, 8(1): 87-91.
doi: 10.16670/j.cnki.c.n11-5823/tu.2016.01.16
Citation:
Li Changhua, Li Tong, Zhou Fangxiao, Cui Huanhuan. Realization of Revit Pipeline Auto-labeling Method[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2016, 8(1): 87-91.
doi: 10.16670/j.cnki.c.n11-5823/tu.2016.01.16
摘要:本文基于Revit管线批量自动标注的实际工程要求，将平行管线标注分为无变径标注和有变径标注两类，并且阐述了会导致管线发生变径的三种情况针。对不同的管线排布情况分别采用了相对应的管线自动标注方法。本文还提出了一种利用引垂线的方法解决了多变径平行管线批量标注问题。实验结果表明，该类方法可以快速高效地对管线进行标注，与传统的标注方法相比，简化了操作，提高了标注效率，为以后二次开发提供了一定的经验。
Abstract: Based on the actual engineering requirements of Revit pipeline auto-labeling, this paper divides parallel pipeline labels into two categories of no-adjustable and adjustable parallel pipeline labels and describes three situations which will lead to pipeline diameter changes.In addition, the paper puts forward a method of using lead vertical to solve the problem of the changeable diameter parallel pipes labeling.The experimental results show that: this kind of labeling methods greatly increase labeling efficiency, and compared to the use of Revit interactive interface, they simplifies the operation, improve the labeling efficiency and provide some experiences for secondary development in the future.
| [1] | |
| [2] | |
| [3] |
吝江峰.基于Revit在水利工程中常规注释_标识二次开发[J].河南科技, 2015.doi: 10.3969/j.issn.1008-7516.2015.01.005 |
| [4] |
叶雄进. Revit二次开发从入门到精通学习之路[EB]. CSDN博客, 2011. |
| [5] |
Autodesk Asia Pte Ltd. Autodesk Revit二次开发基础教程.同济大学出版社, 2015(8). |
| [6] |
肖英.基于VB的AutoCAD尺寸标注[J].制造技术与机床, 2007(12).doi: 10.3969/j.issn.1005-2402.2007.12.038 |
| [7] | |
| [8] |
计量
- PDF下载量(29)
- 文章访问量(2253)
- HTML全文浏览量(922)
