Citation:
Xia Juwei, Fang Tingchen, Yang Jialin, Chen Yuanhong. Modeling Method of Climbing Formwork Equipment for Super-High Construction and Its Engineering Application. Journal of Information Technologyin Civil Engineering and Architecture,
2018, 10(3): 97-103.
doi: 10.16670/j.cnki.cn11-5823/tu.2018.03.18
2018, 10(3): 97-103. doi: 10.16670/j.cnki.cn11-5823/tu.2018.03.18
Modeling Method of Climbing Formwork Equipment for Super-High Construction and Its Engineering Application
Shanghai Construction Group Co., Ltd., Shanghai 200080, China |
The climbing formwork equipment, typically represented by the hydraulic climbing formwork and integral steel platform formwork, plays an improtant role in the construction of super high-rise buildings. In view of the low efficiency problem of the modeling for computational analysis of the climbing formwork equipment, this paper introduces an interactive modeling method based on Midas/Gen mgt file and mgt command. Firstly, two conventional modeling methods are introduced for the computational analysis of climbing mold equipment. Then the interactive modeling method based on the mgt command and mgt file is introduced, emphasizing on analysis of the framework and format of the method. Lastly, the effectiveness of the method is verified through an actual super-high engineering application, which shows that this method can significantly improve the modeling efficiency and can be applied to fine calculation and analysis of the climbing formwork equipment.
| [1] |
张松, 崔晓强, 陆云, 等.广州珠江城核心筒施工关键技术研究[J].建筑施工, 2011, 33(10): 880-883.doi: 10.3969/j.issn.1004-1001.2011.10.002 |
| [2] | |
| [3] |
龚剑, 朱毅敏, 徐磊.超高层建筑核心筒结构施工中的筒架支撑式液压爬升整体钢平台模架技术[J].建筑施工, 2014, 36(1): 33-38. |
| [4] |
龚剑, 佘逊克, 黄玉林.钢柱筒架交替支撑式液压爬升整体钢平台模架技术[J].建筑施工, 2014, 36(1): 47-50. |
| [5] |
黄玉林, 夏巨伟.超高结构建造的钢柱筒架交替支撑式液压爬升整体钢平台模架体系计算分析[J].建筑施工, 2016, 38(6): 743-746. |
| [6] | |
| [7] |
关振群, 顾元宪, 张洪武, 等.三维CAD/CAE一体化的参数化动态有限元建模[J].计算机集成制造系统, 2003, 9(12): 1112-1119.doi: 10.3969/j.issn.1006-5911.2003.12.012 |
| [8] |
李江波. 高层钢筋混凝土结构ABAQUS参数化建模方法[D]. 哈尔滨工业大学, 2011. |
| [9] | |
| [10] |
宋玉旺, 杨昌昊, 石晓飞, 等.六边形蜂窝夹层板的参数化有限元建模方法[J].计算机辅助设计与图形学学报, 2015(1): 175-183. |
Metrics
- PDF Downloads(45)
- Abstract views(4475)
- HTML views(1874)
