摘要:GSRevit是在Revit上开发的结构BIM正向设计系统，在Revit上完成受力构件以及荷载和设计属性的输入；形成的Revit模型可以直接进行结构计算，并在Revit上自动生成墙柱梁板施工图。同时，GSRevit还可进行装配式结构的计算和设计，采用GSRevit进行结构设计，只需建立一次模型。结构设计人员初步设计时建立三维模型，平面剖切形成模板图用于初步设计，添加荷载和设计属性即可用于结构计算，添加钢筋信息用于绘制施工图，三维模型可直接用于碰撞检查，最后将模型进行算量、施工和运营维护。

Abstract: GSRevit is a structural BIM forward design system developed on Revit, which completes the input of wall columns, beams and slabs, as well as load and design attributes; The resulting Revit model can be used to calculate the structure directly, and automatically generate the wall column and beam slab construction drawings on Revit. GSRevit can also be used for assembly structure calculation and design. Using GSRevit for structural design, only need to establish a model. The structural designer establishes a three-dimensional model during the preliminary design, and the plane cutting forms a template diagram for the preliminary design. Load and design attributes can be used for structural calculation, and reinforcement information can be used to draw construction drawings. The three-dimensional model can be directly used for collision inspection, and finally the model is given to calculation, construction and operation maintenance.