Citation:
Qiang Cui, Jie Zhong, Bin Xiao, Bingnan Zhang, Xianwei Liang, Dong Guo. Application of Automatic Design Technology in Embankment Dynamic Compaction Treatment. Journal of Information Technologyin Civil Engineering and Architecture,
2021, 13(6): 33-38.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.06.06
2021, 13(6): 33-38. doi: 10.16670/j.cnki.cn11-5823/tu.2021.06.06
Application of Automatic Design Technology in Embankment Dynamic Compaction Treatment
T. Y. Lin International Engineering Consulting (China) Co., Ltd., Chongqing 401121, China |
In order to improve the degree of compaction and decrease the post-construction settlement of the high embankments, dynamic compaction treatment method is usually used on them. After the analysis of the design principle of embankment dynamic compaction treatment, the workflow of automatic design technology based on dynamo is proposed, and the dynamo program taking the 3D embankment model as the executive object is compiled. These achievements were successfully applied to the Huanhu Road Project (Phase Ⅱ) in Chongqing Liangjiang Collaborative Innovation Zone. The result proves that the use of automatic design technology in embankment dynamic compaction treatment can improve the design quality and get a higher working efficiency as well.
| [1] |
焦柯, 陈少伟, 许志坚, 等. BIM正向设计实践中若干关键技术研究[J]. 土木建筑工程信息技术, 2019, 11(5): 19-27. |
| [2] |
陈家勇, 赖亚平, 肖奎, 等. 景观桥梁BIM设计及应用实践——以合川渠江景观大桥为例[J]. 公路工程, 2018, 43(6): 102-107.doi: 10.3969/j.issn.1674-0610.2018.06.020 |
| [3] | |
| [4] |
欧佳佳, 戴玮. BIM技术在公路工程设计阶段中应用研究[J]. 土木建筑工程信息技术, 2020, 12(4): 119-123. |
| [5] |
周游, 陈建丰, 范宇丰, 等. BIM技术在市政立交设计阶段的应用研究[J]. 重庆交通大学学报(自然科学版), 2019, 38(7): 60-65.doi: 10.3969/j.issn.1674-0696.2019.07.10 |
| [6] |
孙建诚, 朱双晗, 蒋浩鹏. BIM技术在公路工程中的应用研究[J]. 中外公路, 2019, 39(4): 294-297. |
| [7] |
崔强, 钟杰, 肖彬, 等. Dynamo参数化设计在软土路基处理中的应用研究[J]. 重庆建筑, 2021, 20(2): 24-27. |
| [8] |
陆洋, 朱璨. 可视化编程工具Subassembly Composer与Dynamo for Civil3D在复杂路基BIM设计中的结合应用[C]. 第六届全国BIM学术会议, 2020. |
| [9] |
吴生海, 刘陕南, 刘永哓, 等. 基于Dynamo可视化编程建模的BIM技术应用与分析[J]. 工业建筑, 2018, 48(2): 35-38. |
| [10] |
曹阳. 基于Dynamo for Revit的参数化设计在水力机械设计中的运用[J]. 土木建筑工程信息技术, 2018, 10(2): 29-34. |
Metrics
- PDF Downloads(29)
- Abstract views(1549)
- HTML views(1105)
