2009, 1(1): 103-107.
SmartPlant 3D在镍钴设计院中的应用
金川镍钴研究设计院, 甘肃金昌 737100 |
The Application of SmartPlant 3D in the Ni&Co Engineering Institute
Jinchuan Ni&Co Research and Engineering Institute, Jinchang Gansu 737100, China |
引用本文:
刘强. SmartPlant 3D在镍钴设计院中的应用[J]. 土木建筑工程信息技术,
2009, 1(1): 103-107.
Citation:
Liu qiang. The Application of SmartPlant 3D in the Ni&Co Engineering Institute[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2009, 1(1): 103-107.
摘要:本文主要介绍了SmartPlant3D三维工厂设计软件在有色行业设计院中的应用, 从软件安装、二次开发、系统管理等方面总结了一些使用经验, 并通过某电解镍项目的三维设计过程简要论述了SmartPlant 3D在工程项目中的部分具体功能应用。
Abstract: This article mainly introduces the application of SmartPlant3D three-dimensional plant design software in the Non-ferrous industry engineering institute, from the aspects of software setup, secondary development, system management to summarize some experiences.Through adopting the three-dimensional design process of the electrolytic nickel project, discuss the application specific functions of SmartPlant3D in the project.
| [1] |
Suvrat Dongre. SmartPlant 3D Setup and Administration. INTERGRAPH |
| [2] |
乔旭斌. 三维工厂设计软件PlantSpace在韶关电厂中的应用. 计算机辅助设计与制造 |
| [3] |
余隋怀, 苟秉宸, 李晓玲.三维数字化定制设计技术与应用.北京理工大学出版社, 2006 |
计量
- PDF下载量(11)
- 文章访问量(1199)
- HTML全文浏览量(988)
