组合钢板墙混凝土板厚度及剪力连接件间距的确定

张龙; 徐其功

2013, 5(4): 55-60.

组合钢板墙混凝土板厚度及剪力连接件间距的确定

1.	华南理工大学土木与交通工程学院, 广州 510640
2.	广东省建筑科学研究院, 广州 510502

网络出版日期: 2013-08-01

作者简介: 张龙(1988-)，男，在读硕士。主要研究方向：钢结构

The Research On Concrete Plate Thickness And Shear Connectors Spacing Of Composite Steel Plate Shear Walls

Zhang Long ^1,, Xu Qigong ^1,2,

1.	Department Of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China
2.	JianKe Architecture Design Institute, Guangzhou 510502, China

Available Online: 2013-08-01

引用本文: 张龙, 徐其功. 组合钢板墙混凝土板厚度及剪力连接件间距的确定[J]. 土木建筑工程信息技术, 2013, 5(4): 55-60.

Citation: Zhang Long, Xu Qigong. The Research On Concrete Plate Thickness And Shear Connectors Spacing Of Composite Steel Plate Shear Walls[J]. Journal of Information Technologyin Civil Engineering and Architecture, 2013, 5(4): 55-60.

摘要:组合钢板剪力墙是指由钢板、混凝土板及边缘框架通过连接构件组成的组合构件，钢板和混凝土板通过剪力连接件连接。从弹性板屈曲理论出发，针对钢板与混凝土板相互作用情况不同将组合钢板墙分成组合型墙和防屈曲型墙，研究钢板承担水平荷载、混凝土板不直接参与受力情况下组合钢板墙混凝土板厚度和剪力连接件间距的设计。对比讨论了混凝土板厚度计算公式的适用性，并给出建议以形成正在编制的广东省标准《钢结构设计技术规程》的有关章节。

关键词: 组合钢板墙, 混凝土板厚度, 剪力连接件间距, 弹性板屈曲理论

Abstract: Composite steel plate shear walls consist of steel plate, reinforced concrete plate and steel frame used mechanical connectors. According to the interaction differences between steel plate and reinforced concrete plate, there are two kinds of composite steel plate shear walls: combination wall and Buckling-restrained wall. Studies were carried out to estimate the reinforced concrete plate thickness and shear connectors spacing on condition that steel plate directly handle the load with RC plate don't take part in. Discussing and making some suggestions about the formulae for determining the reinforced concrete plate thickness as well as the maximum spacing of the shear connectors in order to make suggestions for Technical specification for steel structure of Guangdong Province.

Key words: Composite Steel Plate Shear Walls, Shear Connectors Spacing, Concrete Plate Thickness, Theory of Elastic Plate Buckling

[1]	AISC. Seismic provisions for structural steel buildings[S]. Chicago: American Institute of Steel Construction, 2002.
[2]	Astaneh-Asl A.Seismic behavior and design of composite steel plate shear walls, Steel TIPS report[J].Structural steel educational council, May.2002.
[3]	ISC. Steel Design Guide 20: Steel Plate Shear Wall.
[4]	Timoshenko S.P.& Gere J.M.Theory of elastic stability[M].New York: McGraw-Hill Book Company, 1961.
[5]	陈骥.钢结构稳定-理论与设计.北京:科学出版社, 2003.
[6]	郭彦林, 董全利, 周明.防屈曲钢板剪力墙弹性性能及混凝土盖板约束刚度研究.建筑结构学报, 2009.
[7]	郭彦林, 董全利, 周明.防屈曲钢板剪力墙滞回性能的理论与试验研究[J].建筑结构学报, 2009.
[8]	董全利. 防屈曲钢板剪力墙结构性能及设计方法研究[D]. 北京: 清华大学, 2007.
[9]	Zhao Q, Astaneh-Asl A.Cyclic Behavior of Traditional and Innovative Composite Shear Walls[J].Journal of Structural Engineering, Vol.130, No.2, February 1, 2004.
[10]	Canadian Standards Association (CSA), Limit states design of steel structures, CAN/CSA-S16. 1-94 Willowdale, Ont., Canada, 1994.
[11]	Zhao Q, Astaneh-Asl A. Cyclic Behavior of Traditional and Innovative Composite ShearWalls, Journal of Structural Engineering, Vol. 130, No. 2, February 1, 2004.
[12]	马欣伯. 两边连接钢板剪力墙及组合剪力墙抗震性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2009.
[13]	李然. 钢板剪力墙与组合剪力墙滞回性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2011.
[14]	郭彦林, 周明. 两层单跨钢板墙的比较试验研究及其简化分析模型. 第六届全国土木工程研究生学术论坛论文集. 北京: 清华大学, 2008, 11.

组合钢板墙混凝土板厚度及剪力连接件间距的确定

The Research On Concrete Plate Thickness And Shear Connectors Spacing Of Composite Steel Plate Shear Walls

计量

作者相关

关键词相关

Figures And Tables