2021, 13(1): 24-28. doi: 10.16670/j.cnki.cn11-5823/tu.2021.01.04
基于BIM技术的结构施工图设计应用
| 1. | 上海理工大学 土木系，上海 200093 |
| 2. | 北京市建筑设计研究院有限公司，北京 100045 |
| 3. | 中国建筑设计研究院有限公司，北京 100044 |
Design and Application of Structural Construction Drawing Based on BIM Technology
| 1. | Department of Civil Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China |
| 2. | Beijing Institute of Architectural Design(Group) Co., Ltd., Beijing 100045, China |
| 3. | China Architecture Design & Research Group, Beijing 100044, China |
引用本文:
刘俊, 王子俊, 林紫茹, 胡笳, 王磊. 基于BIM技术的结构施工图设计应用[J]. 土木建筑工程信息技术,
2021, 13(1): 24-28.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.01.04
Citation:
Liu Jun, Wang Zijun, Lin Ziru, Hu Jia, Wang Lei. Design and Application of Structural Construction Drawing Based on BIM Technology[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2021, 13(1): 24-28.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.01.04
摘要:针对BIM技术在建筑结构设计的应用现状进行了梳理，对Revit平台的协同设计应用进行了探讨，将结构专业协同设计的具体流程与常规设计流程进行了对比。之后，对基于Revit的结构施工图设计软件的特点进行了比较，并总结了基于BIM技术的三种结构设计方式，对其优缺点进行了分析。最后，针对某个实际工程，采用常用BIM施工图工具软件进行了算例分析。研究结果表明：基于Revit结构施工图软件和结构计算软件能够实现BIM施工图设计；建筑体量较大，对计算机性能要求较高；协同模式的选择对设计过程和结果影响较大；Revit结构施工图软件导出结构计算模型稳定性有待提高。
Abstract: The application status of BIM technology in building structural design is summarized, and the application of collaborative design of Revit platform is discussed in this paper. Specific process of collaborative design for structural specialty is compared with conventional design process. After that, the characteristics of the software for structural construction drawing design based on Revit are compared. Three structural design methods based on BIM technology are summarized and thier advantages and disadvantages are analyzed.Finally, a practical project is analyzed by using BIM construction drawing tool software. The results show that:the BIM construction drawing design can be realized by the structure calculation software based on Revit, the large volume of building requires high computer performance, the selection of collaborative mode has great influence on the design process and results, and the stability of the structure calculation model derived from Revit structural construction drawing software needs to be improved.
| [1] |
何永祥, 潘志广, 黄世超. BIM技术在施工图绘制中的应用研究[J].土木建筑工程信息技术, 2013, 5(2):15-22. |
| [2] |
李超军, 叶雅思, 唐洁. BIM技术在船闸金属结构全生命周期中的应用[J].水运工程, 2019, 553(3):159-164. |
| [3] |
赵清清, 王建勇. ARX反应器智能关联技术在BIM施工图中的应用[J].土木建筑工程信息技术, 2013, 5(6):111-114. |
| [4] |
刘占省, 汤红玲, 王泽强, 等.建筑信息建模技术在长沙国际会展中心营建中的应用[J].工业建筑, 2016, 46(9):179-183+107. |
| [5] |
蒋凤昌, 周桂香, 李永奎, 等.上海市胸科医院科教综合楼设计阶段的BIM应用[J].工业建筑, 2018, 48(2):39-46. |
| [6] |
邢雪娇, 钟波涛, 骆汉宾, 等.基于BIM的建筑专业设计合规性自动审查系统及其关键技术[J].土木工程与管理学报, 2019, 36(5):129-136.doi: 10.3969/j.issn.2095-0985.2019.05.021 |
| [7] | |
| [8] |
邓雪原, 张之勇, 刘西拉.基于IFC标准的建筑结构模型的自动生成[J].土木工程学报, 2007, 40(2):6-12. |
| [9] |
常治国, 杨晖柱, 张其林, 等.基于BIM技术的钢结构厂房设计软件[J].土木建筑工程信息技术, 2013, 5(3):8-13. |
| [10] | |
| [11] | |
| [12] |
潘平. BIM技术在建筑结构设计中的应用与研究[D].华中科技大学, 2013. |
| [13] |
吴文勇, 焦柯, 童慧波, 等.基于Revit的建筑结构BIM正向设计方法及软件实现[J].土木建筑工程信息技术, 2018, 10(3):39-45. |
计量
- PDF下载量(64)
- 文章访问量(2866)
- HTML全文浏览量(1394)
