2023, 15(1): 42-48. doi: 10.16670/j.cnki.cn11-5823/tu.2023.01.08
基于Revit二次开发的钢结构节点参数化设计研究
北京建筑大学 土木与交通工程学院，北京 100044 |
Parametric Design of Steel Structure Joints Based on Secondary Development of Revit
School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture, Beijing 100044, China |
引用本文:
陶军, 王亮. 基于Revit二次开发的钢结构节点参数化设计研究[J]. 土木建筑工程信息技术,
2023, 15(1): 42-48.
doi: 10.16670/j.cnki.cn11-5823/tu.2023.01.08
Citation:
Jun Tao, Liang Wang. Parametric Design of Steel Structure Joints Based on Secondary Development of Revit[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2023, 15(1): 42-48.
doi: 10.16670/j.cnki.cn11-5823/tu.2023.01.08
摘要:使用Revit软件在钢结构节点深化设计过程中，由于节点形式复杂多样，易造成建模困难以及节点设计深度不足的问题。为此，笔者依据钢结构梁柱等节点设计规范要求，结合设计及建造经验，建立了基于Revit族的钢结构梁柱节点、梁梁节点、柱脚节点等参数化族构件模型。引用Revit应用程序编程接口和C#编码识别模型中目标节点的位置，调取已建立的钢结构节点族模型，载入实际项目模型中，以实现参数化钢结构节点模型的自动生成。该方法能够快速生成钢结构节点模型，解决节点处深化设计花费时间成本较多的问题，大大提高设计人员工作效率。
Abstract: Due to the complex and diverse forms of joints, it is easy to cause difficulties in modeling and insufficient depth of joint design in the process of deepening steel structure joints by Revit software. Therefore, according to the requirements of the design code for beam-column joints of steel structures and combined with design and construction experience, a parametric family member model of beam-column joints, beam-beam joints, and column foot joints of steel structures based on the Revit family is established. The Revit application programming interface and C # code are used to identify the location of the target node in the model. The established steel structure node family model is selected and loaded into the actual project model to realize the automatic generation of a parametric steel structure node model. This method can quickly generate the steel structure node model, solve the problem of time cost in deepening the design of nodes, and greatly improve the work efficiency of designers.
| [1] |
周峥, 邓朗妮, 廖羚, 等. BIM技术在钢结构深化设计与施工中应用热点的知识图谱构建方法研究[J]. 土木建筑工程信息技术, 2020, 12(3): 16-21. |
| [2] |
Shuyu Shi. Research on the Application Mode of Prefabricated Steel Structure Building Design Based on BIM Technology[C]//Journal of Physics: Conference Series: Iop Publishing, 2021: 022052. |
| [3] |
陈明, 李阳, 周观根. 钢结构空间网架BIM仿真建模技术研究[J]. 建筑结构, 2020, 50(11): 90-95. |
| [4] |
杨丽娟. BIM三维正向设计在钢结构工业厂房中的应用[J]. 建筑结构, 2021, 51(S2): 1249-1253. |
| [5] |
张慎, 杨浩, 杜新喜. 基于CATIA钢结构节点设计软件开发与应用[J]. 建筑结构, 2020, 50(7): 7. |
| [6] |
Lu Shuang Wei, Qun Wei, Kai Sun. Development of BIM Technology in Steel Structure Design Software[C]//Applied Mechanics and Materials: Trans Tech Publ, 2014: 2546-2549. |
| [7] |
Yin-Gang Wang, Xiong-Jun He, Jia He, et al. Virtual trial assembly of steel structure based on BIM platform[J]. Automation in Construction, 2022, 141: 104395.doi: 10.1016/j.autcon.2022.104395 |
| [8] |
严旭. BIM技术在某钢结构厂房全过程设计中的应用[J]. 结构工程师, 2020, 36(5): 186-196.doi: 10.3969/j.issn.1005-0159.2020.05.026 |
| [9] | |
| [10] | |
| [11] |
宋腾. 基于BIM的钢结构连接节点深化设计二次开发研究[D]. 河北科技大学, 2019. |
| [12] | |
| [13] |
李正农, 朱爱民, 吴红华, 等. 基于Revit的二次开发在脚手架设计中的应用研究[J]. 湖南大学学报(自然科学版), 2018, 45(9): 65-73. |
| [14] |
陆海燕, 张怡, 崔琨, 等. 基于BIM技术的梁柱节点全三维深化设计[J]. 土木建筑工程信息技术, 2021, 13(1): 83-88. |
| [15] |
Autodesk Revit二次开发基础教程[M]. 上海: 同济大学出版社, 2016: 1-23. |
计量
- PDF下载量(42)
- 文章访问量(1490)
- HTML全文浏览量(1019)
