Citation:
Zhang Haiqing, Liu Zhixiang. Optimizing Analysis on Excavation and Support of a Highway Cut Slope based on Strength Reduction Method. Journal of Information Technologyin Civil Engineering and Architecture,
2014, 6(1): 51-56.
2014, 6(1): 51-56.
Optimizing Analysis on Excavation and Support of a Highway Cut Slope based on Strength Reduction Method
Civil King Software Technology Company Limited, Beijing 100048, China |
On the background of a mountainous area highway cut slope engineering, a plane strain finite element model is built by PLAXIS with its embedded strength reduction method for stability analysis.Firstly, the slope stability under excavation and reinforcement is analyzed according to the exposed stratigraphic, indicating that global stability requirement will be satisfied with frame anchor reinforcing the first two stage slopes. Secondly, after some studies it can be seen that overlying weathering layer thickness which significantly affects slope stability, a major research object for optimized design. Finally, the effect of the strength parameter c、φ, of strongly weathered layer and moderately weathered layer, on the slope stability is calculated using the built-in parameter sensitivity function of PLAXIS, which shows that c value of the strongly weathered layer has the most apparent influence on the result.
| [1] |
郑颖人, 张玉芳, 赵尚毅, 等.有限元强度折减法在元磨高速公路高边坡工程中的应用[J].岩石力学与工程学报, 2005, 24(21): 3812-3817.doi: 10.3321/j.issn:1000-6915.2005.21.002 |
| [2] |
李宁, 钱七虎.岩质高边坡稳定性分析与评价中的四个准则[J].岩石力学与工程学报, 2010, 29(9): 1754-1759. |
| [3] |
巨能攀, 赵建军, 邓辉, 等.公路高边坡稳定性评价及支护优化设计[J].岩石力学与工程学报, 2009, 28(6): 1152-1161. |
| [4] |
胡新丽, 唐辉明, 陈建平.高速公路顺层路堑边坡优化设计方法[J].地球科学——中国地质大学学报, 2001, 26(1):373-376. |
| [5] |
北京金土木软件技术有限公司编著.PLAXIS岩土工程软件使用指南[M].北京:人民交通出版社, 2010. |
| [6] |
郑颖人, 赵尚毅.有限元强度折减法在土坡与岩坡中的应用[J].岩石力学与工程学报, 2004, 23(19): 3381-3388.doi: 10.3321/j.issn:1000-6915.2004.19.029 |
| [7] |
唐晓松, 郑颖人, 邬爱清, 等.应用PLAXIS有限元程序进行渗流作用下的边坡稳定性分析[J].长江科学院院报, 2006, 23(4): 13-16. |
| [8] |
张建勋, 陈福全.用强度折减有限元法分析土坡稳定问题[J].山东科技大学学报(自然科学版), 2004, 23(1): 115-117. |
| [9] |
R.B.J.BRINKGREVE, EzENGIN, and W.M. SWOLFS. Plaxis 2D 2012 Scientific Manual[M]. Delft University of Technology & Plaxis bv, The Netherlands, 2012. |
Metrics
- PDF Downloads(13)
- Abstract views(1401)
- HTML views(1495)
