2016, 8(5): 51-57. doi: 10.16670/j.cnki.cn11-5823/tu.2016.05.10
预制装配式停车楼的参数化生成设计
中国航天建设集团有限公司, 北京 100071 |
Parametric Generative Design of Prefabricated Parking Structure
China Aerospace Construction Group Co., Ltd., Beijing 100071, China |
引用本文:
李媛, 王其明, 李宝龙, 赵妍妍, 何金生, 赵培. 预制装配式停车楼的参数化生成设计[J]. 土木建筑工程信息技术,
2016, 8(5): 51-57.
doi: 10.16670/j.cnki.cn11-5823/tu.2016.05.10
Citation:
Li Yuan, Wang Qiming, Li Baolong, Zhao Yanyan, He Jinsheng, Zhao Pei. Parametric Generative Design of Prefabricated Parking Structure[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2016, 8(5): 51-57.
doi: 10.16670/j.cnki.cn11-5823/tu.2016.05.10
摘要:通过深入分析参数化生成设计方法及基于Revit的编程插件Dynamo的优势, 本文以预制装配式停车楼为例, 研究了停车楼的生成逻辑, 并在归并构件族的基础上, 展示生成设计中的四个重要环节, 实现了输入任意长宽高参数即可自动生成三维模型的程序, 同时可通过参数精细化设计构件, 为信息传递的真实完整性和未来的3D打印构件打下基础。
Abstract: Based on the analysis of the parametric generative design method and the advantage of Dynamo, which is a parametric programming plugin of Revit, this article takes a prefabricated parking structure as an example to study its generative logic, group the similar components and present four important links of the process. Consequently, the programme can automatically generate a 3D model by inputting any length, width and height and control a component precisely through parameters, which is the foundation of the realness and integrity of the information transmission and 3D printing of components in the future.
| [1] |
陈志华.外国建筑史(19世纪末叶以前)[M].北京:中国建筑工业出版社, 2010. |
| [2] |
李诫.营造法式[M].北京:中国书店出版社, 2006. |
| [3] |
Neil L, Yuan P F. Scripting the Future[M].上海:同济大学出版社, 2012. |
| [4] |
李媛. 大跨建筑表皮的参数化设计方法研究[D]. 哈尔滨工业大学博士论文, 2013. |
| [5] |
汽车库建筑设计规范(JGJ100-2015)[S]. 北京: 中国建筑工业出版社, 2015. |
计量
- PDF下载量(20)
- 文章访问量(1973)
- HTML全文浏览量(873)
