2017, 9(5): 29-33. doi: 10.16670/j.cnki.cn11-5823/tu.2017.05.05
基于BIM和移动定位的施工质量管理系统
清华大学土木工程系, 北京 100084 |
A Construction Quality Management System based on BIM and Indoor Positioning
Department of Civil Engineering, Tsinghua University, Beijing 100084, China |
引用本文:
马智亮, 蔡诗瑶, 杨启亮, 毛娜. 基于BIM和移动定位的施工质量管理系统[J]. 土木建筑工程信息技术,
2017, 9(5): 29-33.
doi: 10.16670/j.cnki.cn11-5823/tu.2017.05.05
Citation:
Ma Zhiliang, Cai Shiyao, Yang Qiliang, Mao Na. A Construction Quality Management System based on BIM and Indoor Positioning[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2017, 9(5): 29-33.
doi: 10.16670/j.cnki.cn11-5823/tu.2017.05.05
摘要:本研究基于建筑信息模型(Building Information Modeling, BIM)技术和室内移动定位技术, 研制施工质量管理系统, 用于建筑工程施工质量验收, 以解决目前施工质量验收中规范实施过程中存在的漏检、数据二次转录等问题。本研究从施工质量验收相关规范出发, 分析了施工质量验收的标准化过程与要求, 并在此基础上设计了系统功能, 建立了系统架构。然后提出了基于BIM的验收任务生成算法、移动定位集成方法等关键技术与方法, 研制了施工质量管理的原型系统。最后, 该原型系统在实际工程施工中进行了试用, 验证了该系统的可行性。
Abstract: This paper develops a prototype system for construction quality management based on Building Information Modeling (BIM) and indoor positioning, which is aimed to solve the problems in the traditional inspection process, such as omissions in quality inspection and second-hand manual entry of the original inspection data into the computer software.In this research, based on the national standards for construction quality inspection in China, the standard process and requirements of construction quality inspection are analyzed, and then the functions and architecture of the system are designed.Next, an algorithm for inspection task generation is proposed based on BIM and a prototype system is implemented by integrating an indoor positioning technique.Finally, the prototype system is tested at a real construction site to verify its effectiveness and efficiency.
计量
- PDF下载量(38)
- 文章访问量(2453)
- HTML全文浏览量(799)