2018, 10(4): 84-90. doi: 10.16670/j.cnki.cn11-5823/tu.2018.04.13
基于BIM的工程量统计实践——以句容市人民医院项目应用为例
1. | 句容市城市建设投资有限责任公司, 句容 212400 |
2. | 华东建筑设计研究院有限公司, 上海 200041 |
Practice of Engineering Quantity Statistics Based on BIM
1. | Jurong Urban Construction Investment Co, . Ltd., Jurong 200122, China |
2. | Arcplus Group PLC, Shanghai 200041, China |
引用本文:
樊建慧, 蒋琴华, 林凡舟. 基于BIM的工程量统计实践——以句容市人民医院项目应用为例[J]. 土木建筑工程信息技术,
2018, 10(4): 84-90.
doi: 10.16670/j.cnki.cn11-5823/tu.2018.04.13
Citation:
Fan Jianhui, Jiang Qinhua, Lin Fanzhou. Practice of Engineering Quantity Statistics Based on BIM[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2018, 10(4): 84-90.
doi: 10.16670/j.cnki.cn11-5823/tu.2018.04.13
摘要:在国内的BIM工程量统计应用中,由于BIM技术体系本地化不足的原因,在实际项目中存在准确性、时效性和适用性不足的问题。在部分BIM项目中,BIM和传统工程量甚至采取了双轨制,非但没能提高效率,而且形成了重复劳动,造成了资源浪费。本文以示范项目为例,分析了工程量统计中的挑战及难点,从项目应用需求出发,借鉴国际标准的标准化方向,创新性的提出了基于BIM的工程量统计的技术路线,总结出构件编码和属性信息本地化的技术解决方案,为实现基于BIM的工程量统计的快速生成提供新思路。
Abstract: For the domestic BIM engineering quantitystatistics, due to the insufficient localization of the BIM technology system, there are problems existed in the actual project includingpooraccuracy, insufficient timeliness and inadequateapplicability. In some projects, the BIM application and engineering quantitystatistics even act a dual-track system, which result in duplication of labor and waste of resources. Taking the demonstration project as an example, this paper analyzes the challenges and difficulties in the engineering quantitystatistics. The paper starts from the project application requirements, referencesinternational standards, and proposes an innovative technical route of BIM-based engineering quantitystatistics with a technical solution for localization of component coding and attribute information. The studies in this paper provides new ideas for the rapid generation of engineering quantity statistics based on BIM.
[1] |
焦明明.北京天坛医院BIM应用的探索与实践[J].中国勘察设计, 2016 (8) :37-41.doi: 10.3969/j.issn.1006-9607.2016.08.015 |
[2] |
齐聪, 苏鸿.关于Revit平台工程量计算软件的若干问题的探讨[J].计算机工程与设计, 2008, 29 (14) :3760-3762. |
[3] |
林韩涵, 周红波, 何溪.基于BIM设计软件的工程量计算实现方法[J].建筑经济, 2015, 36 (4) :59-62. |
[4] |
苗恩新, 赵军, 钟丽. BIM技术在贵阳金阳会展城某项目工程算量和碰撞检测应用[J].城市建筑, 2014(36):175-175.doi: 10.3969/j.issn.1673-0232.2014.36.167 |
[5] |
GB/T 7027, 信息分类和编码的基本原则和方法 |
[6] |
建筑工程设计信息模型分类和编码标准(征求意见稿) |
[7] |
GB50500-2013, 建设工程工程量清单计价规范 |
[8] |
DGTJ08-2201-2016, 上海市建筑信息模型应用标准 |
[9] |
上海市建筑信息模型技术应用指南》(2017版) |
[10] |
Version1.0, AEC (UK) BIM Standard for Autodesk Revit |
计量
- PDF下载量(59)
- 文章访问量(2255)
- HTML全文浏览量(1316)