2021, 13(6): 14-19. doi: 10.16670/j.cnki.cn11-5823/tu.2021.06.03
基于Revit的预制剪力墙配筋设计软件研究
1. | 北京市住宅产业化集团股份有限公司,北京 100073 |
2. | 承德绿建建筑材料有限公司,承德 067000 |
Research on Revit-Based Reinforcement Design Software for Precast Shear Wall
1. | Beijing Building Industrialization Group Co., Ltd., Beijing 100073, China |
2. | Chengde Green Building Energy Saving Technology Co., Ltd., Chengde 067000, China |
引用本文:
杨谦, 艾旭, 张沂, 李洋, 刘洋, 杨思忠. 基于Revit的预制剪力墙配筋设计软件研究[J]. 土木建筑工程信息技术,
2021, 13(6): 14-19.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.06.03
Citation:
Qian Yang, Xu Ai, Yi Zhang, Yang Li, Yang Liu, Sizhong Yang. Research on Revit-Based Reinforcement Design Software for Precast Shear Wall[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2021, 13(6): 14-19.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.06.03
摘要:预制构件配筋设计是装配式建筑深化设计过程中的关键步骤,而现有的BIM平台预制构件深化设计软件难以满足实际使用需求。本文提出了一种新的预制构件建模方法,同时在钢筋设计标准化的基础上与面向对象的软件开发方法相结合,研发了一款基于Revit软件的预制剪力墙构件配筋设计软件,并且在工程实践中获得了应用验证。
Abstract: The reinforcement design of precast components is a key step in the detail design process of prefabricated buildings, and the existing BIM precast components deepening design software is difficult to meet the actual needs of use. This paper proposes a new prefabricated component modeling method. With the standardization of steel bar design, it combines with object-oriented software development methods to develop a prefabricated shear wall component reinforcement design software based on Revit, and obtains application verification in engineering practice.
计量
- PDF下载量(61)
- 文章访问量(1846)
- HTML全文浏览量(874)