2014, 6(5): 34-37.
基于CATIA的桥梁BOM自动生成方法的研究
上海市政工程设计研究总院(集团)第六设计院有限公司, 合肥 230001 |
The Study on Autogeneration of Bridge BOM based on CATIA
Shanghai Municipal Engineering Design Institute (Group) Sixth Design Institute CO., LTD., Hefei 230001, China |
引用本文:
王继红. 基于CATIA的桥梁BOM自动生成方法的研究[J]. 土木建筑工程信息技术,
2014, 6(5): 34-37.
Citation:
Wang Jihong. The Study on Autogeneration of Bridge BOM based on CATIA[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2014, 6(5): 34-37.
摘要:利用CATIA软件对桥梁完成三维建模后, 需要对装配文件中的零件信息进行提取, 通过VB开发应用程序, 对符合用户要求的零件信息进行自动提取、分类和存储, 并录入EXCEL表格中, 完成BOM的编制。该技术提高了设计效率, 取得了良好的应用效果。
Abstract: Informations of the parts in the product should be extracted after finishing the 3D model of Bridge by CATIA software.The paper applies VB program to extract, order and store the related information of components automatically, and export to EXCEL file to generate the required standard BOM table.This method can improve design efficiency and achieve good application results.
计量
- PDF下载量(15)
- 文章访问量(1463)
- HTML全文浏览量(820)
