Application of Information Splitting and Parametric Design in Prefabricated Building

Can Sun; Fanyao Zeng; Qinmin Wang; Xiaolu Wang; Lianghui Yin

doi:10.16670/j.cnki.cn11-5823/tu.2021.04.20

Citation: Can Sun, Fanyao Zeng, Qinmin Wang, Xiaolu Wang, Lianghui Yin. Application of Information Splitting and Parametric Design in Prefabricated Building. Journal of Information Technologyin Civil Engineering and Architecture, 2021, 13(4): 132-138. doi: 10.16670/j.cnki.cn11-5823/tu.2021.04.20

2021, 13(4): 132-138. doi: 10.16670/j.cnki.cn11-5823/tu.2021.04.20

Application of Information Splitting and Parametric Design in Prefabricated Building

Can Sun ^1,, Fanyao Zeng ^2,, Qinmin Wang ^1,, Xiaolu Wang ^1,, Lianghui Yin ^1,

1.	School of Environment and Civil Engineering, Dongguan University of Technology, Dongguan 523808, China
2.	Shenzhen Municipal Design & Resarch Institute Co., Ltd., Shenzhen, 518029, China

Web Publishing Date: 2021-08-01

Fund Project: 东莞市社会科技发展(重点)项目 2017507140429广东省自然科学基金 2018A030313864

There are two difficult problems for the development of fabricated buildings-how to carry out rapid design, modeling and modular split design under the constraints of design codes. Based on the study of related design codes and parametric design methods of prefabricated components with information technology such as BIM, it is shown that BIM could have a significant effect in the application of prefabricated-component design. The application of BIM can not only realize the parametric, modular design and modeling quickly, but also extract the designers from mechanically repeated work for designing and modeling, save plenty of time cost.

Key words: BIM, Prefabricated Members, Parametric, Split Design

[1]	张仲华, 孙晖, 刘瑛, 等. 装配式建筑信息化管理的探索与实践[J]. 工程管理学报, 2018, 32(3): 47-52.
[2]	于龙飞, 张家春. 装配式建筑发展研究[J]. 低温建筑技术, 2015(9): 40-42.
[3]	陈敏. 基于BIM的装配式建筑项目信息化管理[J]. 建筑施工, 2018, 40(6): 1051-1052.
[4]	张海捷, 张均红. 基于BIM技术下的装配式建筑设计研究[J]. 山东工业技术, 2018(9): 124.
[5]	焦柯, 陈少伟, 许志坚, 等. BIM正向设计实践中若干关键技术研究[J]. 土木建筑工程信息技术, 2019, 11(5): 19-27.
[6]	李希胜, 刘勤文, 王军. 基于BIM的装配式建筑协同设计方法[J]. 土木建筑工程信息技术, 2020, 12(1): 76-83.
[7]	韩进宇. 装配式结构基于BIM的模块化设计方法研究[D]. 沈阳建筑大学, 2015.
[8]	张健, 陶丰烨, 苏涛永. 基于BIM技术的装配式建筑集成体系研究[J]. 建筑科学, 2018, 34(1): 97-102, 129.
[9]	宋竹. 预制装配式建筑的设计要点分析[J]. 住宅与房地产, 2016(6): 68.
[10]	王巧雯. 基于BIM技术的装配式建筑协同化设计研究[J]. 建筑学报, 2017(S1): 18-21.

Metrics

PDF Downloads(31)
Abstract views(1593)
HTML views(1151)

Related Keywords

On this site
BIM Prefabricated Members Parametric Split Design
On Google Scholar
BIM Prefabricated Members Parametric Split Design
On PubMed
BIM Prefabricated Members Parametric Split Design

Application of Information Splitting and Parametric Design in Prefabricated Building

Metrics

Other articles by authors

Related Keywords

Figures And Tables