Citation:
Jie Shen, Kaiyue Ma, Xiaobin Ding. Research on Formwork Selection of As-Cast Concrete with Special-Shaped Structure Based on Analytic Hierarchy Process. Journal of Information Technologyin Civil Engineering and Architecture,
2021, 13(4): 155-162.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.04.23
2021, 13(4): 155-162. doi: 10.16670/j.cnki.cn11-5823/tu.2021.04.23
Research on Formwork Selection of As-Cast Concrete with Special-Shaped Structure Based on Analytic Hierarchy Process
| 1. | Guangzhou Metro Group Co., Ltd., Guangzhou 510030, China |
| 2. | Guangzhou Design Institute, Guangzhou 510620, China |
| 3. | School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510641, China |
The complexity of special-shaped structure and the forming effect of fair-faced concrete put forward higher requirements for the selection of formwork. This paper makes a detailed study on the selection of special-shaped concrete formwork by expert scoring and analytic hierarchy process. Through reviewing the literatures at home and abroad, the factors of the criterion layer and scheme layer under the target layer are obtained, and the AHP model of this type of template selection is established. Finally, taking the special-shaped fair-faced concrete diving platform with curved surface as an example, the decision-making model of the diving platform formwork selection is constructed based on the analytic hierarchy process (AHP), and then the optimal solution of the model is found out, which provides valuable experience for the formwork selection of special-shaped fair-faced concrete structure, and also provides some method guidance for the formwork selection of special-shaped fair-faced concrete members.
| [1] |
许必强, 汪焱卫, 吴文奎, 等. 空间多曲面清水混凝土全木模板施工工艺研究[J]. 施工技术, 2017, 46(14): 54-57+78. |
| [2] |
孙辉, 张洪波, 李恩平. 空间异型结构清水混凝土模板施工技术[J]. 青岛理工大学学报, 2016, 37(1): 121-124. |
| [3] |
杜京, 王京生, 徐伟. 北京启明星辰大厦清水混凝土模板施工技术[J]. 建筑技术, 2008(7): 505-509.doi: 10.3969/j.issn.1000-4726.2008.07.004 |
| [4] |
张浩, 李桂林, 罗蛟钧, 等. 应用铝合金模板实现内墙免(薄)抹灰施工技术[J]. 施工技术, 2014, 43(S2): 464-465. |
| [5] |
霍小妹. 异形梁柱节点硬质复合玻璃钢清水混凝土模板研究与应用[J]. 施工技术, 2011, 40(17): 75-77. |
| [6] |
张云鹏, 周涛, 张伟平. 三维曲面清水混凝土模板体系有限元分析[J]. 建筑施工, 2017, 39(11): 1657-1660. |
| [7] |
LEE, Boon Ming. Controlled permeability formwork liner on concrete: WO 2009. |
| [8] |
张晓兵, 李海涛. 地下室圆弧清水混凝土单侧支护爬模施工技术[J]. 混凝土与水泥制品, 2014(5): 77-79.doi: 10.3969/j.issn.1000-4637.2014.05.019 |
| [9] |
A. M M, Tutikian B F, Ortolan V, et al. Fire resistance performance of concrete-PVC panels with polyvinyl chloride(PVC)stay in place(SIP)formwork[J]. Journal of Materials Research and Technology. 2019, 8(5). |
| [10] |
Hanna A S, Willenbrock J H, Sanvido V E. Knowledge Acquisition and Development for Formwork Selection System[J]. Journal of Construction Engineering and Management, 1992, 118(1): 179-198.doi: 10.1061/(ASCE)0733-9364(1992)118:1(179) |
| [11] |
李强. 清水混凝土在工程中的应用与施工新方法研究[D]. 华北水利水电学院, 2007. |
| [12] |
段先军, 罗惠平. 北京首都机场3号航站楼T3A主楼工程清水混凝土模板施工技术[C]. 中国科学技术协会、河南省人民政府. 第十届中国科协年会论文集(四). 中国科学技术协会、河南省人民政府: 中国科学技术协会学会学术部, 2008: 88-94. |
| [13] |
黄迅. 清水混凝土模板及其施工技术[J]. 中国建筑金属结构, 2009(9): 47-52.doi: 10.3969/j.issn.1671-3362.2009.09.011 |
| [14] |
崔贺涛. 污水处理厂清水混凝土构筑物施工质量控制[J]. 天津建设科技, 2012, 22(1): 45-46.doi: 10.3969/j.issn.1008-3197.2012.01.019 |
| [15] |
朱同然, 马铨斌, 李聪, 等. 大面积超高倾斜清水混凝土剪力墙模板体系的选型及应用[J]. 施工技术, 2013, 42(5): 32-34. |
| [16] |
施以德. 大型弧墙及斜墙清水混凝土的模架施工[J]. 建筑施工, 2014, 36(4): 395-397.doi: 10.3969/j.issn.1004-1001.2014.04.023 |
| [17] |
程永伟, 武彦生, 高雄, 等. 铝合金模板在工程中的设计研究[J]. 昆明冶金高等专科学校学报, 2017, 33(1): 79-83.doi: 10.3969/j.issn.1009-0479.2017.01.014 |
| [18] |
Metrics
- PDF Downloads(22)
- Abstract views(1707)
- HTML views(1170)
