2024, 16(3): 1-7. doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.01
基于机器视觉的混凝土3D打印几何特征自动提取方法研究
1. | 华中科技大学 国家数字建造技术创新中心,武汉 430074 |
2. | 华中科技大学 土木与水利工程学院,武汉 430074 |
3. | 中建工程产业技术研究院有限公司,北京 101300 |
Research on Automatic Extraction Method of Geometric Features of Concrete 3D Printing Based on Machine Vision
1. | National Center of Technology Innovation for Digital Construction, Huazhong University of Science and Technology, Wuhan 430074, China |
2. | School of Civil and Hydraulic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China |
3. | Zhongjian Engineering Industry Technology Research Institute Co., Ltd., Beijing 101300, China |
引用本文:
胡帅, 孙金桥, 王宇向, 霍亮, 陈权要, 周诚. 基于机器视觉的混凝土3D打印几何特征自动提取方法研究[J]. 土木建筑工程信息技术,
2024, 16(3): 1-7.
doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.01
Citation:
Shuai Hu, Jinqiao Sun, Yuxiang Wang, Liang Huo, Quanyao Chen, Cheng Zhou. Research on Automatic Extraction Method of Geometric Features of Concrete 3D Printing Based on Machine Vision[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2024, 16(3): 1-7.
doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.01
摘要:近年来,随着混凝土3D打印技术的不断发展,打印成品的质量受到越来越多的关注。打印成品的几何特征已成为评估打印质量的重要指标。针对当前3D打印混凝土几何特征提取中存在的诸如流程复杂、精度有限及缺乏评价指标等问题,本文设计了基于机器视觉的混凝土3D打印几何特征自动提取方法。首先,采用摄像头阵列部署方法获取打印成品的原始图像,并对原图像正畸以提高图像质量;其次,通过语义分割模型U-Net提取打印成品的几何特征,并对得到的结果进行优化;最后,通过量化的指标值,对其进行了可视化并评价打印结果。实验证明,本文提出的几何特征自动提取方法具有速度快、精度高等显著优势;此外,系统化的打印评价指标可为混凝土3D打印质量评估提供借鉴参考。
Abstract: In recent years, thanks to the continuous development of concrete 3D printing technology, the quality of printed products has attracted more and more attention. The geometric characteristics of printed products have become an important index to evaluate the printing quality. Aiming at solving a series of problems existing in the current 3D printing concrete geometric feature extraction methods e.g. complex process, limited precision and lack of evaluation indicators, this paper designs an automatic extraction method of 3D printing concrete geometric features based on machine vision. Firstly, the camera array deployment method is used to obtain the original image which is orthodontic to improve the image quality. Then, the geometric features of printed products are extracted by semantic segmentation model U-Net, after which the results are optimized. Finally, through the quantitative index value, it is visualized and the print result is evaluated. Experiments have shown that the geometric feature automatic extraction method proposed in this paper has significant advantages such as fast speed and high accuracy. In addition, systematic evaluation indicators can provide reference for the quality evaluation of concrete 3D printing.
[1] |
汤寄予, 张亚可, 高丹盈, 等. 3D打印混凝土研究现状及前景展望[J]. 河南大学学报(自然科学版), 2022, 52(06): 734-744. |
[2] |
余莉莉, 肖正茂, 祝雯. 混凝土3D打印技术研究进展与发展趋势[J]. 广州建筑, 2021, 49(04): 47-51. |
[3] |
王大志, 黄劼, 徐树英. 采用灰度直方图的孔型识别和二值化阈值自动匹配[J]. 兵工自动化, 2005(02): 48-49+52.doi: 10.3969/j.issn.1006-1576.2005.02.023 |
[4] |
张雅兰. 图像的二值化处理[J]. 广西工学院学报, 2002(01): 32-33+55.doi: 10.3969/j.issn.1004-6410.2002.01.009 |
[5] |
Gibbons G J, Williams R, Purnell P, et al. 3D Printing of cement composites[J]. Advances in Applied Ceramics, 2010, 109(5): 287-290.doi: 10.1179/174367509X12472364600878 |
[6] |
Fereshtenejad S, Song J J. Fundamental study on applicability of powder-based 3D printer for physical modeling in rock mechanics[J]. Rock Mechanics and Rock Engineering, 2016, 49: 2065-2074.doi: 10.1007/s00603-015-0904-x |
[7] | |
[8] | |
[9] |
宋相法, 曹志伟, 郑逢斌, 等. 基于随机子空间核极端学习机集成的高光谱遥感图像分类[J]. 计算机科学, 2016, 43(03): 301-304. |
[10] |
鞠杨, 谢和平, 郑泽民, 等. 基于3D打印技术的岩体复杂结构与应力场的可视化方法[J]. 科学通报, 2014, 59(32): 3109-3119. |
[11] |
兰红波, 李涤尘, 卢秉恒. 微纳尺度3D打印[J]. 中国科学: 技术科学, 2015, 45(09): 919-940. |
[12] |
Jiang C, Zhao G F. A preliminary study of 3D printing on rock mechanics[J]. Rock Mechanics and Rock Engineering, 2015, 48: 1041-1050.doi: 10.1007/s00603-014-0612-y |
[13] |
汤富平, 吴臻涵, 蔡东燕, 等. 基于UNet的差值影像变化检测试验与分析[J]. 地理空间信息, 2022, 20(11): 25-28. |
计量
- PDF下载量(20)
- 文章访问量(403)
- HTML全文浏览量(178)