Citation:
Shuai Hu, Jinqiao Sun, Yuxiang Wang, Liang Huo, Quanyao Chen, Cheng Zhou. Research on Automatic Extraction Method of Geometric Features of Concrete 3D Printing Based on Machine Vision. Journal of Information Technologyin Civil Engineering and Architecture,
2024, 16(3): 1-7.
doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.01
2024, 16(3): 1-7. doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.01
Research on Automatic Extraction Method of Geometric Features of Concrete 3D Printing Based on Machine Vision
1. | National Center of Technology Innovation for Digital Construction, Huazhong University of Science and Technology, Wuhan 430074, China |
2. | School of Civil and Hydraulic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China |
3. | Zhongjian Engineering Industry Technology Research Institute Co., Ltd., Beijing 101300, China |
In recent years, thanks to the continuous development of concrete 3D printing technology, the quality of printed products has attracted more and more attention. The geometric characteristics of printed products have become an important index to evaluate the printing quality. Aiming at solving a series of problems existing in the current 3D printing concrete geometric feature extraction methods e.g. complex process, limited precision and lack of evaluation indicators, this paper designs an automatic extraction method of 3D printing concrete geometric features based on machine vision. Firstly, the camera array deployment method is used to obtain the original image which is orthodontic to improve the image quality. Then, the geometric features of printed products are extracted by semantic segmentation model U-Net, after which the results are optimized. Finally, through the quantitative index value, it is visualized and the print result is evaluated. Experiments have shown that the geometric feature automatic extraction method proposed in this paper has significant advantages such as fast speed and high accuracy. In addition, systematic evaluation indicators can provide reference for the quality evaluation of concrete 3D printing.
[1] |
汤寄予, 张亚可, 高丹盈, 等. 3D打印混凝土研究现状及前景展望[J]. 河南大学学报(自然科学版), 2022, 52(06): 734-744. |
[2] |
余莉莉, 肖正茂, 祝雯. 混凝土3D打印技术研究进展与发展趋势[J]. 广州建筑, 2021, 49(04): 47-51. |
[3] |
王大志, 黄劼, 徐树英. 采用灰度直方图的孔型识别和二值化阈值自动匹配[J]. 兵工自动化, 2005(02): 48-49+52.doi: 10.3969/j.issn.1006-1576.2005.02.023 |
[4] |
张雅兰. 图像的二值化处理[J]. 广西工学院学报, 2002(01): 32-33+55.doi: 10.3969/j.issn.1004-6410.2002.01.009 |
[5] |
Gibbons G J, Williams R, Purnell P, et al. 3D Printing of cement composites[J]. Advances in Applied Ceramics, 2010, 109(5): 287-290.doi: 10.1179/174367509X12472364600878 |
[6] |
Fereshtenejad S, Song J J. Fundamental study on applicability of powder-based 3D printer for physical modeling in rock mechanics[J]. Rock Mechanics and Rock Engineering, 2016, 49: 2065-2074.doi: 10.1007/s00603-015-0904-x |
[7] | |
[8] | |
[9] |
宋相法, 曹志伟, 郑逢斌, 等. 基于随机子空间核极端学习机集成的高光谱遥感图像分类[J]. 计算机科学, 2016, 43(03): 301-304. |
[10] |
鞠杨, 谢和平, 郑泽民, 等. 基于3D打印技术的岩体复杂结构与应力场的可视化方法[J]. 科学通报, 2014, 59(32): 3109-3119. |
[11] |
兰红波, 李涤尘, 卢秉恒. 微纳尺度3D打印[J]. 中国科学: 技术科学, 2015, 45(09): 919-940. |
[12] |
Jiang C, Zhao G F. A preliminary study of 3D printing on rock mechanics[J]. Rock Mechanics and Rock Engineering, 2015, 48: 1041-1050.doi: 10.1007/s00603-014-0612-y |
[13] |
汤富平, 吴臻涵, 蔡东燕, 等. 基于UNet的差值影像变化检测试验与分析[J]. 地理空间信息, 2022, 20(11): 25-28. |
Metrics
- PDF Downloads(22)
- Abstract views(413)
- HTML views(183)