Citation:
Weiping Mei, Shuizhou Xu, Zhixin Guan. Full-professional Collaborative Design of Low-rise Light-steel Residential Buildings Based on BIM Platform——Take a Two-story Villa in Hebei as an Example. Journal of Information Technologyin Civil Engineering and Architecture,
2024, 16(3): 109-114.
doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.20
2024, 16(3): 109-114. doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.20
Full-professional Collaborative Design of Low-rise Light-steel Residential Buildings Based on BIM Platform——Take a Two-story Villa in Hebei as an Example
1. | China Power Construction Group Architectural Planning and Design Institute Co., Ltd., Beijing 100024, China |
2. | China Power Construction Group Beijing Survey, Design and Research Institute Co., Ltd., Beijing 100024, China |
The cold-formed thin-walled steel structure residence is widely used in low-rise light-steel structure residence with rapid construction demand because of its light weight, small seismic response and high installation accuracy. However, due to the limitations of the relevant structural modeling and calculation software in the industry, the design of cold-formed thin-walled steel structures has always remained at the two-dimensional design level. This paper has innovated the secondary development plug-in based on Revit2017, and realized the BIM positive design of cold-formed thin-walled steel structures for the first time in the industry, and integrated a full-professional collaborative design platform with automatic modeling and structural calculation. Through the function-based modular house design, the industrial product thinking is introduced in the design stage. Considering different living needs, the functional spaces e.g. bedroom, living room, kitchen and bathroom are designed into several standardized functional modules, which form a diversified flat through module combination. An open modular database suitable for each functional space of cold-formed thin-walled steel composite wallboard houses has been initially established, which provides a basis for deepening architectural design and standardization of wallboard splitting. Integrating the BIM intelligent building system and compiling the algorithm according to the specification requirements, the intelligent production of light steel keel has been realized in the design stage by realizing the functions include: rapid keel generation and 3D modeling, generation of calculation sheets and design drawings, deepening of details and calculation, docking of production and manufacturing equipment and automatic transmission of production and manufacturing data.
[1] |
郑华海, 刘匀, 李元齐, 等. 轻钢龙骨体系工业化住宅部品信息模型[J]. 同济大学学报(自然科学版), 2016, 44(2): 228-234. |
[2] |
应宇垦, 罗金辉, 张其林, 等. BIM技术在轻钢龙骨结构深化设计中的应用研究[J]. 土木建筑工程信息技术, 2020, 12 (2): 37-43.doi: 10.16670/j.cnki.cn11-5823/tu.2020.02.06 |
[3] |
王珏. 轻钢农宅的标准化设计与多样化应用研究[D]. 北京: 清华大学, 2012. |
[4] |
李元齐, 杜志杰, 路志浩, 等. 装配式钢结构体系建筑一体化建造技术研发和实践[J]. 建筑钢结构进展, 2021, 23(10): 12-25. |
[5] |
庄子粒, 翟旭远, 翟洪远. 村镇低能耗抗震房屋建造技术研发与应用[J]. 建设科技, 2012, (23): 54-57. |
[6] |
杨建行. 分层装配式钢结构工业化住宅体系研发与应用[J]. 钢结构, 2012, (05): 15-18.doi: 10.3969/j.issn.1007-9963.2012.05.004 |
[7] |
中华人民共和国住房和城乡建设部. GB50018-2002冷弯薄壁型钢结构技术规范[S]. 北京: 中国建筑工业出版社, 2002. |
[8] |
中华人民共和国住房和城乡建设部. JGJ227-2011低层冷弯薄壁型钢房屋建筑技术规程[S]. 北京: 中国建筑工业出版社, 2011. |
[9] |
中华人民共和国住房和城乡建设部. JGJ421-2018冷弯薄壁型钢多层住宅技术标准[S]. 北京: 中国建筑工业出版社, 2018. |
[10] |
周天华, 石宇, 周绪红. 冷弯型钢组合墙体抗剪承载力试验研究[J]. 西安建筑科技大学学报(自然科学版), 2006, 38(1): 83-88. |
[11] |
周绪红, 石宇, 周天华, 等. 冷弯薄壁型钢结构住宅组合墙体承载力受剪性能研究[J]. 建筑结构学报, 2006, 27(3): 42-47. |
[12] |
刘殿忠, 简振鹏, 郝振鹏. 基于ABAQUS的型钢-泡沫混凝土界面抗剪性能研究[J]. 吉林建筑大学学报, 2014, 31(2): 1-4. |
[13] |
喻启杭, 谭俨珂, 张其林, 等. 冷弯型钢龙骨复合墙板力学性能分析及部品库实现[J]. 建筑结构, 2022, 52 (S1): 1222-1228. |
Metrics
- PDF Downloads(1)
- Abstract views(224)
- HTML views(192)