Citation: Wu Hainan. Method used by SATWE to Determine Dimensions of Column Rigid Joint Panel and Influences on Structure Stiffness. Journal of Information Technologyin Civil Engineering and Architecture, 2015, 7(1): 85-88.
2015, 7(1): 85-88.
Method used by SATWE to Determine Dimensions of Column Rigid Joint Panel and Influences on Structure Stiffness
The Design Software Department, CABR Technology Co., Ltd., Beijing 100013, China |
The overlap parts of beam-column in frame structures and other types of structures form beam-column rigid joint panels, if the overlap parts are large enough. The dimensions of rigid panel zone can influence the effects of integral structure analysis. It would lead to different results in structural analysis and design, especially in frame structures and partial frame-supported shear wall structures by using different methods to determine column rigid zones. Based on current structure design codes, this article illustrates the method that is used by SATWE to determine rigid panel zones and the effect on the stiffness of structures by beam-column rigid joint panels.
[1] |
GB50011-2010. 建筑抗震设计规范[S]. |
[2] |
JGJ3-2010. 高层建筑混凝土结构技术规程[S]. |
[3] |
GB50010-2010. 混凝土结构设计规范[S]. |
[4] |
李国胜.多高层钢筋混凝土结构设计中疑难问题的处理及算例.第二版, 北京.中国建筑工业出版社[M], 2011, 157-162. |
[5] |
陈岱林.金新阳.张志宏.钢筋混凝土构件设计原理及算例[M].北京, 中国建筑工业出版社, 2005, 81-147. |
[6] |
付学怡.实用高层建筑结构设计[M].第二版, 北京.中国建筑工业出版社, 2010, 38-45. |
[7] |
薛素铎.赵均.高向宇.建筑抗震设计[M].第二版, 北京.科学出版社, 2007, 13-17. |
[8] |
徐培福.付学怡.王翠坤.肖从真.复杂高层建筑结构设计[M].北京.中国建筑工业出版社, 2005, 95-108. |
[9] |
刘立新.叶燕华.混凝土结构原理[M].武汉.武汉理工大学出版社, 2010, 121-137. |
[10] |
林同炎S. D. 斯多台斯伯力. 结构概念和体系[M]. 高立人. 方鄂华. 钱稼茹, 北京. 中国建筑工业出版社, 1999, 218-235. |
Metrics
- PDF Downloads(9)
- Abstract views(825)
- HTML views(913)