Citation:
Liu Qinwen, Li Xisheng, Wang Jun. Prefabrication Rate - Oriented Optimization of Prefabricated Construction Design Scheme. Journal of Information Technologyin Civil Engineering and Architecture,
2019, 11(2): 122-128.
doi: 10.16670/j.cnki.cn11-5823/tu.2019.02.21
2019, 11(2): 122-128. doi: 10.16670/j.cnki.cn11-5823/tu.2019.02.21
Prefabrication Rate - Oriented Optimization of Prefabricated Construction Design Scheme
College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China |
Based on the systematic analysis on the design standards and design procedures of prefabricated buildings, and aiming at improving the prefabrication rate, this paper develops a design scheme of prefabricated constructions, and establishes an automatic calculation model prefabrication rate through the parametric design method applying BIM and Dynamo. The study in this paper organically integrates the prefabrication rate goals into the prefabricated construction, and proposes the selection of application proportion of prefabricated components under different prefabrication rates for reference through statistical analysis. In the end, a case study is given to verify the feasibility of this method in the optimization of prefabricated construction design scheme.
| [1] |
GB/T51129-2017.装配式建筑评价标准[S].中华人民共和国住房城乡建设部. |
| [2] | |
| [3] |
齐宝库, 张阳.装配式建筑发展瓶颈与对策研究[J].沈阳建筑大学学报(社会科学版), 2015, 17(02): 156-159. |
| [4] |
张健, 陶丰烨, 苏涛永.基于BIM技术的装配式建筑集成体系研究[J].建筑科学, 2018, 34(01): 97-102+129.doi: 10.3969/j.issn.1008-1933.2018.01.019 |
| [5] |
GB/T 51231-2016.装配式混凝土建筑技术标准[S].中国建筑工业出版社. |
| [6] | |
| [7] |
张德海, 陈娜, 韩进宇.基于BIM的模块化设计方法在装配式建筑中的应用[J].土木建筑工程信息技术, 2014, 6(06): 81-85.doi: 10.3969/j.issn.1674-7461.2014.06.015 |
| [8] | |
| [9] |
周文波, 蒋剑, 熊成. BIM技术在预制装配式住宅中的应用研究[J].施工技术, 2012, (22): 72-74. |
| [10] |
Namini S B, Hassanabadi M S, Vahed Y K, et al. Prioritization ofIndustrialized Building System Components for BIM Applications[J].Construction Machinery & construction Technology, 2012, 27(6): 45-47. |
| [11] |
程霄, 王辉. Dynamo可视化编程在预制装配式构件中的应用[J].四川建筑, 2018, 38(02): 25-27+29.doi: 10.3969/j.issn.1007-8983.2018.02.009 |
| [12] |
李媛, 王其明, 李宝龙, 等.预制装配式停车楼的参数化生成设计[J].土木建筑工程信息技术, 2016, 8(05): 51-57. |
| [13] |
孙少辉, 董龙峰, 孙岩波, 等. BIM技术在装配式剪力墙结构施工中的应用[J].建筑技术, 2017, 48(08): 826-829.doi: 10.3969/j.issn.1000-4726.2017.08.008 |
| [14] |
王可卿, 盛超, 朱忠阳, 等.装配式建筑单元设计及其结构试验研究[J].南京工业大学学报(自然科学版), 2017, 39(06): 130-135.doi: 10.3969/j.issn.1671-7627.2017.06.020 |
| [15] |
冯青, 陆小龙, 汪德江, 等.基于BIM的装配整体式混凝土梁的拆分研究[J].土木建筑工程信息技术, 2016, 8(05): 83-85. |
| [16] |
王金, 曹清, 李妍.装配式建筑叠合楼板设计中若干问题讨论[J].建筑结构, 2017, 47(S1): 890-892. |
| [17] |
焦柯, 陈剑佳, 杨新, 等.基于BIM的装配式高层住宅设计关键技术研究[J].土木建筑工程信息技术, 2018, (1): 27-36. |
| [18] |
朱宋煜, 王勇.装配整体式剪力墙结构预制率计算探讨[J].建筑技术, 2016, (z1): 104-106.doi: 10.3969/j.issn.1000-4726.2016.z1.036 |
| [19] | |
| [20] |
曹阳, 许后磊.基于Dynamo for Revit的参数化设计在水力机械设计中的运用[J].土木建筑工程信息技术, 2018, 10(2): 29-34. |
Metrics
- PDF Downloads(37)
- Abstract views(2387)
- HTML views(1232)
