2013, 5(6): 29-34.
PKPM包络设计软件介绍
建研科技股份有限公司 设计软件事业部，北京 100013 |
An Introduction to Envelop Design Software of PKPM
CABR Technology CO., LTD., Beijing 100013, China |
引用本文:
李守功, 黄吉锋, 夏绪勇, 王晓军, 张艳如, 肖丽, 郭华锋, 王雁昆. PKPM包络设计软件介绍[J]. 土木建筑工程信息技术,
2013, 5(6): 29-34.
Citation:
Li Shougong, Huang Jifeng, Xia Xuyong, Wang Xiaojun, Zhang Yanru, Xiao Li, Guo Huafeng, Wang Yankun. An Introduction to Envelop Design Software of PKPM[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2013, 5(6): 29-34.
摘要:本文论述了包络设计软件开发的必要性，分析了开发该软件需要突破的关键技术，针对这些问题提出了解决方案并编制了包络设计程序，接下来将该软件用于多塔包络、性能设计和地下室包络，验证了软件的正确性和高效性，最后对本文做了总结。
Abstract: The necessity of developing the envelop design software is discussed firstly in this paper. To develop the software, key technologies and problems are pointed out. After the software developed, we use it to solve several types of problems. By doing these, we come to the conclusion that the efficient envelop soft which waremeets our requirements in the function, and the result is correct.
| [1] |
中国建筑科学研究院. SATWE多层及高层建筑结构空间有限元分析与设计软件用户手册[M], 2010. |
| [2] |
中国建筑科学研究院. PMSAP复杂多、高层建筑结构分析与设计软件用户手册[M], 2010. |
| [3] |
软件质量保证, Daniel Galin著. |
| [4] |
高层建筑混凝土结构技术规程[M], 2010-10-21 |
| [5] |
混凝土结构设计规范[M], 2010-8-18 |
| [6] |
建筑抗震设计规范[M], 2010-5-31 |
| [7] |
建筑地基基础设计规范[M], 2011-7-26 |
| [8] |
建筑结构荷载规范[M], 2012-5-28 |
| [9] |
结构力学教程, 龙驭球、包世华 |
| [10] |
钢结构设计规范[M], 2003-4-25 |
计量
- PDF下载量(11)
- 文章访问量(1625)
- HTML全文浏览量(709)
