Citation:
Lu Haiyan, Zhang Yi, Cui Kun, Ning Baokuan. Full 3D Deep Design of Bean-column Joints Based on BIM Technology. Journal of Information Technologyin Civil Engineering and Architecture,
2021, 13(1): 83-88.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.01.13
2021, 13(1): 83-88. doi: 10.16670/j.cnki.cn11-5823/tu.2021.01.13
Full 3D Deep Design of Bean-column Joints Based on BIM Technology
School of Architecture and Civil Engineering, Shenyang University of Technology, Shenyang 110870, China |
In order to solve the problem of insufficient depth of joint design at the beam-column joint of reinforced concrete structure due to the intensive staggered reinforcement and complex forms, according to the specification requirements of reinforcement anchoring and arrangement at the beam column joint, combined with the design and construction experience, a full 3D parametric design model of beam column joint based on Revit family is established, and the 3D visual design of beam column joint is realized. This method can not only quickly generate the typical joint reinforcement model, but also carry out the interactive operation of reinforcement avoidance from the perspective of three-dimensional, so as to solve the problem of insufficient reinforcement collision and anchorage at the joint. Using Revit API and C# code to read the joint types of beam column nodes in the project, adjust the established joint three-dimensional parametric model and load it into the joint frame to realize the fast joint reinforcement. The application of the project shows that the proposed method is feasible, and provides a BIM based solution for the in-depth design of the joint reinforcement.
Metrics
- PDF Downloads(43)
- Abstract views(2778)
- HTML views(1000)
