Citation:
Jiaxin Yu, Xuehui Zhang, Botao Yang, Pengyang Li, Daqian Mi, Junhai An. Research on Intelligent Calculation Method of PC Main Structure Assembly Rate. Journal of Information Technologyin Civil Engineering and Architecture,
2021, 13(3): 148-153.
doi: 10.16670/j.cnki.cn11-5823/tu.2021.03.22
2021, 13(3): 148-153. doi: 10.16670/j.cnki.cn11-5823/tu.2021.03.22
Research on Intelligent Calculation Method of PC Main Structure Assembly Rate
College of Architectural Engineering, Hebei University of Science and Technology, Shijiazhuang 050000, China |
At present, the assembly rate of prefabricated buildings in China is calculated manually under relevant specifications according to construction drawings at the design stage. This kind of calculation generates a lot of time and labor costs. Moreover, the same calculation method has different results, and the accuracy is difficult to be guaranteed. In view of this, this paper proposes a calculation method based on BIM.With.Net Formwork4.7 as the framework, C# language was used to carry out secondary development of BIM core software Revit. And the assembly rate calculation method stipulated in the Prefabricated Building Evaluation Standard is incorporated into the plug-in, and the assembly rate calculation of the main structure is realized by establishing the component custom coding system, identifying and obtaining the component data information to calculate the assembly rate of main structure of Precast Concrete (PC). Finally, this paper uses a practical engineering project as an example to validate the feasibility of this method. The research shows that the calculation time and labor cost are greatly reduced and the precision is improved.
| [1] |
刘勤文, 李希胜, 王军. 以装配率为导向的装配式建筑方案设计优化[J]. 土木建筑工程信息技术, 2019, 11(2): 122-128. |
| [2] |
张艾荣. 《装配式建筑评价标准》解读[J]. 城市住宅, 2019, 26(1): 45-48.doi: 10.3969/j.issn.1006-6659.2019.01.009 |
| [3] |
赵为民, 古小英, 张超, 等. 装配式建筑评价方法对比研究[J]. 施工技术, 2018, 47(12): 10-16. |
| [4] |
GB/T51129-2017, 装配式建筑评价标准[S]. 北京: 中国建筑工业出版社, 2017. |
| [5] |
吴双月. 基于BIM的建筑部品信息分类及编码体系研究[D]. 北京交通大学, 2015. |
| [6] |
韩春楠. 基于BIM的装配式混凝土结构建筑预制装配率计算方法与应用框架研究[D]. 东南大学, 2018. |
| [7] |
Autodesk Asia Pte Ltd. 二次开发基础教程[M]. 同济大学出版社, 2015. |
| [8] |
邓玉辉. 基于Revit的装配式建筑装配率计算方法研究与应用[J]. 建材与装饰, 2019, 570(9): 80-81.doi: 10.3969/j.issn.1673-0038.2019.09.057 |
| [9] |
陈远, 康虹. 基于Revit二次开发的PC建筑预制率计算方法研究[J]. 土木建筑工程信息技术, 2018, 10(4): 12-16. |
| [10] |
李亚克, 于海丰, 王国鑫, 等. 基于Revit的管道放坡系统研究与实现[J]. 土木建筑工程信息术, 2019, 11(3): 128-133. |
Metrics
- PDF Downloads(25)
- Abstract views(2146)
- HTML views(1470)
