2020, 12(5): 1-6. doi: 10.16670/j.cnki.cn11-5823/tu.2020.05.01
基于专家系统和BIM的建筑设计合规性自动检查系统研究
郑州大学 土木工程学院,郑州 450001 |
Research on Automated Compliance Checking System for Architectural Design Based on Expert System and BIM
Department of Civil Engineering, Zhengzhou University, Zhengzhou 450001, China |
引用本文:
陈远, 张雨, 康虹. 基于专家系统和BIM的建筑设计合规性自动检查系统研究[J]. 土木建筑工程信息技术,
2020, 12(5): 1-6.
doi: 10.16670/j.cnki.cn11-5823/tu.2020.05.01
Citation:
Chen Yuan, Zhang Yu, Kang Hong. Research on Automated Compliance Checking System for Architectural Design Based on Expert System and BIM[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2020, 12(5): 1-6.
doi: 10.16670/j.cnki.cn11-5823/tu.2020.05.01
摘要:本文对提高BIM模型正向设计的规范性和准确性,保证BIM模型作为设计成果递交的可靠性具有重要意义。论文介绍了专家系统在合规性检查中的应用,分析了建筑设计规范知识获取和表达,建立了建筑设计规范规则库,提出了BIM模型信息提取与映射的基本方法。在此理论基础上提出了合规性检查系统基本框架,开发了基于BIM模型的建筑设计合规性检查原型系统,并通过实际案例验证了系统的理论性和可行性。最后,论文结合今后合规性检查智能系统的发展,针对模型交付标准和规范条文定义两方面提出了建议。
Abstract: The BIM-based compliance checking of architectural design is of great significance to improve the standardization and accuracy of BIM forward design, as well as to ensure the reliability of BIM submission as design results. Through the introduction of the application of expert system in compliance checking, this paper analyzes the acquisition and expression of knowledge of architectural design codes, establishes the rule base of architectural design codes, and proposes the basic method of BIM information extraction and mapping. On such theory basis, the paper further proposes the basic framework of compliance checking system, and develops the prototype system of BIM-based architecture compliance checking system, whose theorization and feasibility are verified by practical cases. At last, considering the future development of the intelligent system for compliance checking, the paper puts forward some suggestions from two aspects of model delivery standards and specification definition.
[1] |
Ismail A S, Ali K N, Iahad N A. A Review on BIM-based automated code compliance checking system: International Conference on Research and Innovation in Information Systems. IEEE, 2017[C]. |
[2] |
Eastman C, Lee J, Jeong Y, et al. Automatic rule-based checking of building designs[J]. Automation in Construction, 2009, 18(8): 1011-1033.doi: 10.1016/j.autcon.2009.07.002 |
[3] |
Martins J P, Monteiro A. LicA:A BIM based automated code-checking application for water distribution systems[J]. Automation in Construction, 2013, 29:12-23.doi: 10.1016/j.autcon.2012.08.008 |
[4] |
胡培宁.基于BIM和Ontology自动审查建筑防火设计的方法研究[D].天津大学, 2016. |
[5] |
宫培松, 骆汉宾, 郭圣煜.基于BIM模型的深基坑工程施工方案自动图审[J].土木工程与管理学报, 2018(4):94-101. |
[6] | |
[7] |
DelisI E A, Delis A. AUTOMATIC FIRE-CODE CHECKING USING EXPERT-SYSTEM TECHNOLOGY[J].JOURNAl of COMPUTINg in CIVIL ENGINEERING, 1995, 2(9): 141-156. |
[8] | |
[9] |
计量
- PDF下载量(51)
- 文章访问量(2709)
- HTML全文浏览量(1306)