Citation:
Hui Zhao, Liang Wang. Engineering Metrology Study of Ultra-high Light Steel Keel Partition Wall Based on WPF. Journal of Information Technologyin Civil Engineering and Architecture,
2024, 16(3): 60-64.
doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.11
2024, 16(3): 60-64. doi: 10.16670/j.cnki.cn11-5823/tu.2024.03.11
Engineering Metrology Study of Ultra-high Light Steel Keel Partition Wall Based on WPF
Beijing University of Civil Engineering and Architecture, Beijing 100044, China |
The section steel skeleton is built in the ordinary light steel keel partition wall to meet the performance requirements of the ultra-high partition wall. However, as for the large volume and complex structure, it is difficult to realize the accurate calculation of engineering quantities. Therefore, combined with the "Light Steel Keel Gypsum Board Partition Wall and Ceiling" (07CJ03-1), this paper explores the arrangement law of keel without relying on the three-dimensional model and further creates WPF application by employing C# language to compile measurement rules, which finally realizes the rapid calculation of the engineering quantity of ultra-high light steel keel partition wall and improves the takeoff efficiency. The data of an actual project is extracted in the paper. Comparing the exported engineering quantity with the consumption calculated according to the specification, the error of the results meets the requirements.
| [1] |
董志国, 孙长礼, 叶建, 等. 天津高银117大厦轻钢龙骨隔墙井道系统关键施工技术[J]. 施工技术, 2016, 45(19): 7-9. |
| [2] |
高东东, 王幼芳, 梁振樱, 等. 基于BIM的工程计量支付一体化系统构建与应用研究[J]. 建筑经济, 2023, 44(02): 53-60. |
| [3] |
罗仲东. 基于BIM的轻钢龙骨建筑建造信息平台研发[D]. 上海: 同济大学, 2018. |
| [4] |
应宇垦, 罗金辉, 张其林, 等. BIM技术在轻钢龙骨结构深化设计中的应用研究[J]. 土木建筑工程信息技术, 2020, 12(02): 37-43.doi: 10.16670/j.cnki.cn11-5823/tu.2020.02.06 |
| [5] |
Khosakitchalert C, Yabuki N, Fukuda T. Development of BIM-based quantity takeoff for light-gauge steel wall framing systems[J]. J. Inf. Technol. Constr., 2020, 25: 522-544. |
| [6] |
郑传才, 李鹤鸣, 于成波. 超高轻钢龙骨防火石膏板隔墙施工技术[J]. 建材发展导向(上), 2023, 21(1): 121-3. |
| [7] |
同济大学, 中国建筑标准设计研究院有限公司. 轻钢龙骨式复合墙体[Z]. 中华人民共和国住房和城乡建设部. 2018: 1-32. |
| [8] |
张文莉, 刘志刚. 纯钢结构超高 大跨度轻质隔墙内置钢骨架施工技术研究[J]. 中国建材科技, 2019, 28(02): 109-112. |
| [9] |
张崇庆. 建筑装饰工程预算(第3版)[M]. 北京: 机械工业出版社, 2015.51. |
| [10] |
夏兆阳, 李元, 彭铭旭, 等. 高地震烈度地区大跨度超高轻钢龙骨石膏板隔墙优化设计与施工[J]. 建筑技术, 2021, 52(12): 1525-1528. |
| [11] |
张玉民, 何鑫, 杨百川. 基于WPF技术的无人机地面站软件设计与实现[J]. 计算机工程与设计, 2019, 40(04): 1167-1173. |
| [12] | |
| [13] |
郭丽荣, 王亮. 基于Revit二次开发的机电工程算量研究[J]. 土木建筑工程信息技术, 2023, 15(01): 30-36.doi: 10.16670/j.cnki.cn11-5823/tu.2023.01.06 |
| [14] |
于鑫, 蒋绮琛, 洪懿昆, 等. 基于Revit二次开发实现三维装饰算量[J]. 土木建筑工程信息技术, 2020, 12(05): 41-45.doi: 10.16670/j.cnki.cn11-5823/tu.2020.05.07 |
Metrics
- PDF Downloads(6)
- Abstract views(582)
- HTML views(402)
