Citation:
Shen Guohui, Sun Bingnan, Lou Wenjuan, Chen Zhen. Finite Element Analysis of Bearing Capacity of Large-scale Steel Structures. Journal of Information Technologyin Civil Engineering and Architecture,
2013, 5(3): 32-36.
2013, 5(3): 32-36.
Finite Element Analysis of Bearing Capacity of Large-scale Steel Structures
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China |
Finite element method is employed to study the bearing capacity of large-scale steel structures. Cross-shaped steel tubular nodes with reinforced plates and nodes without reinforced plates are taken as examples to carry out the study. The modeling process and modeling technique of the finite element method are provided and the bear capacities of the nodes under brace compression are calculated. Then the results obtained from finite element analysis and full-scale tests are compared. Results shew that the model of the brace can be removed in the finite element modeling process when the nodes are under brace compression. The results obtained from finite element analysis and full-scale tests for the tubular nodes with and without reinforced plates are quite close. Furthermore, the finite element method demonstrates its ability to obtain the decreasing part of load-displacement curve.
| [1] |
Paul J C, Makino Y, Kurobane Y. Ultimate resistance of unstiffened multiplanar tubular TT-and KK-joints[J].Structural Engineering, ASCE, 1994, 120(10):2853-2870.doi: 10.1061/(ASCE)0733-9445(1994)120:10(2853) |
| [2] |
Makino Y, Kurobane Y, Ochi K, et al. Database of test and numerical analysis results for unstiffened tubular joints[R], Kumamoto University, 1996. |
| [3] |
Kang C T, Moffat D G, Mistry J. Strength of DT tubular joints with brace and chord compression[J], Structural Engineering, ASCE, 1998, 124(7):775-783.doi: 10.1061/(ASCE)0733-9445(1998)124:7(775) |
| [4] |
鲍侃袁, 沈国辉, 孙炳楠等.高耸钢管塔K型结点极限承载力的试验研究与理论分析[J], 工程力学, 2008, 25(12):114-122. |
| [5] |
邢丽, 赵阳, 董石麟等.矩形钢管焊接球节点的有限元分析与试验研究[J], 浙江大学学报(工学版), 2006, 40(9):1559-1563. |
| [6] |
刘红军, 李正良, 李茂华.钢管输电塔环型加肋节点极限承载力研究[J], 工程力学, 2010, 27(10):65-73. |
| [7] |
白强, 曾德森, 舒爱强等.钢管输电塔环形加肋节点承载力分析[J], 建筑结构, 2012, 42(2):103-106. |
| [8] |
输电线路钢管塔构造设计规定Q/GDW391-2009[S], 国家电网公司, 2009. |
| [9] |
日本铁塔协会. 输电线路钢管塔制作基准[S]. 东京: 丸善株式会社, 1995. |
| [10] |
沈国辉, 陈震, 郭勇等.螺栓节点板抗剪连接的有限元模拟方法研究[J], 工程力学, 2013, 39(1):119-125. |
Metrics
- PDF Downloads(10)
- Abstract views(1287)
- HTML views(790)
