Citation:
Li Yuan, Wang Qiming, Li Baolong, Zhao Yanyan, He Jinsheng, Zhao Pei. Parametric Generative Design of Prefabricated Parking Structure. Journal of Information Technologyin Civil Engineering and Architecture,
2016, 8(5): 51-57.
doi: 10.16670/j.cnki.cn11-5823/tu.2016.05.10
2016, 8(5): 51-57. doi: 10.16670/j.cnki.cn11-5823/tu.2016.05.10
Parametric Generative Design of Prefabricated Parking Structure
China Aerospace Construction Group Co., Ltd., Beijing 100071, China |
Based on the analysis of the parametric generative design method and the advantage of Dynamo, which is a parametric programming plugin of Revit, this article takes a prefabricated parking structure as an example to study its generative logic, group the similar components and present four important links of the process. Consequently, the programme can automatically generate a 3D model by inputting any length, width and height and control a component precisely through parameters, which is the foundation of the realness and integrity of the information transmission and 3D printing of components in the future.
| [1] |
陈志华.外国建筑史(19世纪末叶以前)[M].北京:中国建筑工业出版社, 2010. |
| [2] |
李诫.营造法式[M].北京:中国书店出版社, 2006. |
| [3] |
Neil L, Yuan P F. Scripting the Future[M].上海:同济大学出版社, 2012. |
| [4] |
李媛. 大跨建筑表皮的参数化设计方法研究[D]. 哈尔滨工业大学博士论文, 2013. |
| [5] |
汽车库建筑设计规范(JGJ100-2015)[S]. 北京: 中国建筑工业出版社, 2015. |
Metrics
- PDF Downloads(20)
- Abstract views(1972)
- HTML views(871)
