2018, 10(3): 97-103. doi: 10.16670/j.cnki.cn11-5823/tu.2018.03.18
基于Midas/Gen的超高建造爬升模架设备建模方法及工程应用
上海建工集团股份有限公司,上海 200080 |
Modeling Method of Climbing Formwork Equipment for Super-High Construction and Its Engineering Application
Shanghai Construction Group Co., Ltd., Shanghai 200080, China |
引用本文:
夏巨伟, 房霆宸, 杨佳林, 陈渊鸿. 基于Midas/Gen的超高建造爬升模架设备建模方法及工程应用[J]. 土木建筑工程信息技术,
2018, 10(3): 97-103.
doi: 10.16670/j.cnki.cn11-5823/tu.2018.03.18
Citation:
Xia Juwei, Fang Tingchen, Yang Jialin, Chen Yuanhong. Modeling Method of Climbing Formwork Equipment for Super-High Construction and Its Engineering Application[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2018, 10(3): 97-103.
doi: 10.16670/j.cnki.cn11-5823/tu.2018.03.18
摘要:以液压爬升模架和整体钢平台模架为典型代表的爬升模架设备在超高层建筑建造中发挥了关键作用。针对目前爬升模架设备计算分析建模效率低的问题,介绍了一种基于Midas/Gen mgt文件的交互式建模方法。首先对目前爬升模架设备计算分析两种常规建模方法进行了介绍。其次介绍了mgt命令和mgt文件的交互式建模方法,重点对mgt命令建模的框架和格式进行了分析。最后结合实际超高层工程验证了本文方法的有效性,工程应用表明该方法能够大幅度提升建模效率且能应用于精细化计算分析。
Abstract: The climbing formwork equipment, typically represented by the hydraulic climbing formwork and integral steel platform formwork, plays an improtant role in the construction of super high-rise buildings. In view of the low efficiency problem of the modeling for computational analysis of the climbing formwork equipment, this paper introduces an interactive modeling method based on Midas/Gen mgt file and mgt command. Firstly, two conventional modeling methods are introduced for the computational analysis of climbing mold equipment. Then the interactive modeling method based on the mgt command and mgt file is introduced, emphasizing on analysis of the framework and format of the method. Lastly, the effectiveness of the method is verified through an actual super-high engineering application, which shows that this method can significantly improve the modeling efficiency and can be applied to fine calculation and analysis of the climbing formwork equipment.
[1] |
张松, 崔晓强, 陆云, 等.广州珠江城核心筒施工关键技术研究[J].建筑施工, 2011, 33(10): 880-883.doi: 10.3969/j.issn.1004-1001.2011.10.002 |
[2] | |
[3] |
龚剑, 朱毅敏, 徐磊.超高层建筑核心筒结构施工中的筒架支撑式液压爬升整体钢平台模架技术[J].建筑施工, 2014, 36(1): 33-38. |
[4] |
龚剑, 佘逊克, 黄玉林.钢柱筒架交替支撑式液压爬升整体钢平台模架技术[J].建筑施工, 2014, 36(1): 47-50. |
[5] |
黄玉林, 夏巨伟.超高结构建造的钢柱筒架交替支撑式液压爬升整体钢平台模架体系计算分析[J].建筑施工, 2016, 38(6): 743-746. |
[6] | |
[7] |
关振群, 顾元宪, 张洪武, 等.三维CAD/CAE一体化的参数化动态有限元建模[J].计算机集成制造系统, 2003, 9(12): 1112-1119.doi: 10.3969/j.issn.1006-5911.2003.12.012 |
[8] |
李江波. 高层钢筋混凝土结构ABAQUS参数化建模方法[D]. 哈尔滨工业大学, 2011. |
[9] | |
[10] |
宋玉旺, 杨昌昊, 石晓飞, 等.六边形蜂窝夹层板的参数化有限元建模方法[J].计算机辅助设计与图形学学报, 2015(1): 175-183. |
计量
- PDF下载量(44)
- 文章访问量(4276)
- HTML全文浏览量(1776)