Citation: Yang Rao, Chengyu Zhao, Hongtao Zhou, Xiao Cheng, Pengcheng Li, Qingli Hu. An Introduction of BIM Applications on the EPC Project of Kuwait International Airport New Terminal Building. Journal of Information Technologyin Civil Engineering and Architecture, 2021, 13(5): 49-57. doi: 10.16670/j.cnki.cn11-5823/tu.2021.05.07
2021, 13(5): 49-57. doi: 10.16670/j.cnki.cn11-5823/tu.2021.05.07
An Introduction of BIM Applications on the EPC Project of Kuwait International Airport New Terminal Building
1. | T.Y.LIN International Group, Chongqing 401120, China |
2. | State Key Laboratory for Disaster Reduction in Civil Engineering, Guiyang 550003, China |
The EPC project of Kuwait International Airport new terminal building is one of the key projects of "One Belt One Road". The project reveals difficulties and high requirements on top-down designing, BIM data management, EPC management and site coordination. The life-cycle of the project is based on international BIM standards, including design, procurement and construction.It is a huge challenge for the domestic engineering contractors. This paper introduces how the project team researched the international BIM standards, established a top-down designing system and an on-site coordination mechanism to achieve a good performance. On this basis, it further carried out comprehensive BIM technology innovation and application, and realized the improvement of its own technical and management capabilities. The BIM application results of this project was awarded the first prize in the 2020 National BIM Contest. The introduction could be a good example for other domestic engineering contractors aiming at international construction market, and a chance for merging domestic and international BIM standards and management strategies.
[1] |
Chunk Eastman, Charles, Fisher David, et al. An Outline of the Building Description System, Institute of Physical Planning, Carnegie-Mellon University, 1974. |
[2] |
清华大学软件学院BIM课题组. 中国建筑信息模型标准框架研究[J]. 土木建筑工程信息技术, 2010, 2(2): 1-5.doi: 10.3969/j.issn.1674-7461.2010.02.001 |
[3] |
The National Building Information Modeling Standard(NBIMS)Committee(2007)), The National Building Information Model Standard Part1: Overview Principles and Methodologies. |
[4] |
信息分类和编码的基本原则与方法: GB/T 7027—2002[S]. |
[5] |
董政民. 支持BIM应用的建筑设施编码体系研究[J]. 土木建筑工程信息技术, 2014, 6(5): 107-111. |
[6] |
薛刚, 王晓飞, 冯涛. 建筑信息模型BIM构件分类体系研究[J]. 建筑技术, 2018, 49(5): 457-460.doi: 10.3969/j.issn.1000-4726.2018.05.002 |
[7] |
https://www.csiresources.org/standards/omniclass/standards-omniclass-about[W]. |
[8] |
毕湘利, 陈鸿, 赖华辉, 等. 基于建筑信息模型(BIM)的城市轨道交通设施设备分类与编码研究[J]. 城市轨道交通研究, 2016, 19(1): 5-9. |
[9] |
DB11/T 717—2010城市轨道交通设施设备分类与代码[S]. |
[10] |
SZDB/Z 84—2013城市轨道交通设施设备编码规范[S]. |
[11] |
Metrics
- PDF Downloads(60)
- Abstract views(2190)
- HTML views(938)