2020, 12(3): 44-49. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.07
基于BIM技术的钢筋智能化加工技术研究
中铁七局集团西安铁路工程有限公司，西安 710032 |
Research on Intelligent Processing Technology of Reinforcement Based on BIM Technology
Xi'an Railway Engineering Co., Ltd., China Railway Seventh Group, Xi'an 710032, China |
引用本文:
胡勇, 邸克孟, 冯锐. 基于BIM技术的钢筋智能化加工技术研究[J]. 土木建筑工程信息技术,
2020, 12(3): 44-49.
doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.07
Citation:
Hu Yong, Di Kemeng, Feng Rui. Research on Intelligent Processing Technology of Reinforcement Based on BIM Technology[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2020, 12(3): 44-49.
doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.07
摘要:钢筋作为建筑工程不可或缺的材料，一直都是建筑施工企业推行精细化管理、实现降本增效的重点，本研究通过将BIM技术、二维码等前沿信息化技术与钢筋数控加工设备相结合，研发基于BIM技术的钢筋智能化加工管理系统，实现从钢筋BIM建模到下料优化，再到自动化裁剪加工，既提高生产效率，还最大限度节约钢筋成本。
Abstract: As an indispensable material for construction engineering, the reinforcement has always been the key point for construction enterprises to carry out refined management and realize cost reduction and efficiency increase. The study in this paper integrates the BIM technology, QR code and other cutting-edge information technologies with the digital control processing equipment of reinforcement, to develop an intelligent processing management system of reinforcement based on the BIM technology, realizing the BIM modeling, cutting optimization, and automatic cutting processing of reinforcement. The system not only improves the production efficiency, but also saves the cost of steel bars to the greatest extent.
| [1] |
滕淑润.钢筋工程计量、下料与隐蔽验收一体化研究与应用[D].兰州交通大学, 2014. |
| [2] |
王永合, 谢厚礼, 王金伟, 等.建筑钢筋加工配送信息化管理系统构建研究[J].绿色环保建材, 2017(1):127. |
| [3] |
王辉, 明磊, 付俊, 等.房建项目钢筋BIM智能翻样技术创新与实践[J].施工技术, 2019, 48(4):70-72. |
| [4] | |
| [5] |
Bret J.Wagne. A genetic algorithm solution for one-dimensional bundled stock cutting[J].EuropeanJournal of Operational Research, 1999, 117(2):368-381. |
| [6] |
Chien-Tung Yang, Wei-Chu Weng.An improved tabu search approach with mixed objective function for one-dimensional cutting stock problems[J].Advances in Engineering Software, 2006, 37:502-513. |
| [7] |
Cui Yaodong. A CAN system for one-dimensional stock cutting[J].Advances in Engineering Software, 2012, 47:7-16.doi: 10.1016/j.advengsoft.2011.12.004 |
| [8] |
魏凉良, 叶家玮.一维下料问题的改进自适应遗传算法[J]华南理工大学学报(自然科学版), 2003, 31(6):26-30. |
| [9] | |
| [10] |
祝胜兰.一维下料问题的优化算法研究[D].华中科技大学, 2013. |
| [11] |
计量
- PDF下载量(69)
- 文章访问量(3506)
- HTML全文浏览量(1319)
