Citation:
Li Hua, Zhao Jinsong, Wang Congjun, Huang Benca. Study and Application of Transformation of Finite Element Models Based on Database. Journal of Information Technologyin Civil Engineering and Architecture,
2009, 1(1): 95-98.
2009, 1(1): 95-98.
Study and Application of Transformation of Finite Element Models Based on Database
| 1. | Shanghai CAD Simula Design Technologies Co., Ltd, Shanghai 200086, China |
| 2. | School of Aerospace and Mechanics of Tongji University, Shanghai 200092, China |
A database center on finite element model is set up by classifying the nodes, elements, constraints, loads and some other information.Then this paper analyzed the interface formats of SATWE, ETABS and ANSYS which commonly are widely used in the fields of structural design for building by means of the coding technology of.NET(C#) and database, realized the input and output of the finite element data and read their finite element data into database center of finite element model.Finally the database could generate the interface model files as CAE codes need by operating the center database.This paper has mainly achieved that inputting the finite element model data into database and transferring the finite element models of SATWE into ETABS and ANSYS.The accuracy of the transformation has been verified by one complex example of core tube structure which is a real high-rise building.The first three frequencies and the total mass are analyzed and the results from different codes are in good agreement.
| [1] |
王文渊, SATWE与ETABS数据接口软件编制, 工程建设与设计, 2008 |
| [2] |
尚俊杰, ASP. NET程序设计, 清华大学出版社, 北京交通大学出版社, 2004 |
| [3] |
中国建筑科学研究部PKPM CAD工程部, 高层结构建筑空间有限元分析和设计软件SATWE[CP], 2002. 1 |
| [4] |
Computer And Structures Inc., CSI分析参考手册[K], 2004 |
| [5] |
王新敏, ANSYS工程结构数值分析, 人民交通大学出版社, 2007 |
| [6] |
建筑结构荷载规范(GB50009 -2001) |
| [7] |
JGJ3-2002高层建筑混凝土技术结构规范[S] |
| [8] |
Eric Gunnerson. A Programmer's Introduction to C#, 2001 |
| [9] |
黄本才, 高层结构建筑计算与设计, 同济大学出版社1998 |
Metrics
- PDF Downloads(13)
- Abstract views(1056)
- HTML views(640)
