信息技术在构件生产阶段的应用与展望

周垚; 李希胜

doi:10.16670/j.cnki.cn11-5823/tu.2020.03.11

2020, 12(3): 72-78. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.11

信息技术在构件生产阶段的应用与展望

周垚 , 李希胜 ^,

南京林业大学土木工程学院，南京 210037

通讯作者: 李希胜,

网络出版日期: 2020-06-01

作者简介: 周垚(1996-)，女，硕士研究生，主要研究方向：BIM技术研究与应用

Application and Prospect of Information Technology in Component Manufacturing Stage

Zhou Yao , Li Xisheng ^,

College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China

Corresponding author: Li Xisheng,

Available Online: 2020-06-01

引用本文: 周垚, 李希胜. 信息技术在构件生产阶段的应用与展望[J]. 土木建筑工程信息技术, 2020, 12(3): 72-78. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.11

Citation: Zhou Yao, Li Xisheng. Application and Prospect of Information Technology in Component Manufacturing Stage[J]. Journal of Information Technologyin Civil Engineering and Architecture, 2020, 12(3): 72-78. doi: 10.16670/j.cnki.cn11-5823/tu.2020.03.11

摘要:将信息技术与构件生产相结合是近年来的研究热点。尽管这些研究已经极大地推动了企业信息化的发展，但还缺少一个关键性分析来总结研究成果、识别研究空白。为此，本文梳理了预制构件的生产过程，将其分为深化设计、生产计划、生产制造以及存储运输四个阶段，并针对各阶段的研究成果进行定性分析，总结了研究不足。最后，针对性地提出基于BIM与本体的构件自动拆分、动态扰动管理、智能供应链、装配式构件信息交付手册等未来可能的研究方向。

关键词: 预制构件, 生产阶段, 信息技术, 综述

Abstract: To combine the information technology with the component manufacturing is a hot spot for research in recent years. Although these studies have greatly promoted the development of enterprise informatization, there is still lacking of a key analysis to summarize research results and identify research gaps. For this reason, this paper sorts out the manufacture process of prefabricated components, and divides them into four stages, namely, detailed design, manufacture planning, production manufacturing and storage & transportation. For each stage, qualitative analysis is conducted on the research results to summarize the research deficiencies. At last, this paper proposes some possible directions in the future research, including the automatic component splitting based on BIM and ontology, the dynamic disturbance management, the intelligent supply chain, the delivery manual for prefabricated component information, and etc.

Key words: Prefabricated Components, Manufacturing Stage, Information Technology, Overview

[1]	蒋慧, 李希胜.基于BIM的建筑结构协同设计关键问题研究[J].森林工程, 2018, 34(6): 102-108.
[2]	王军, 李希胜, 刘勤文.基于Dynamo的绿色建筑方案设计优化[J].土木建筑工程信息技术, 2019, 11(3): 121-127.
[3]	刘勤文, 李希胜, 王军.以装配率为导向的装配式建筑方案设计优化[J].土木建筑工程信息技术, 2019, 11(2): 122-128.
[4]	王飞鹏, 吴涛, 刘喜, 等.基于BIM技术的装配式剪力墙结构研究[J].施工技术, 2019, 48(6): 21-24+88.
[5]	靳鸣, 方长建, 李春蝶. BIM技术在装配式建筑深化设计中的应用研究[J].施工技术, 2017, 46(16): 53-57.
[6]	冯青, 陆小龙, 汪德江, 等.基于BIM的装配整体式混凝土梁的拆分研究[J].土木建筑工程信息技术, 2016, 8(5): 83-85.
[7]	刘春原, 许晓文, 付素娟.部分装配式框架结构自动拆分办法[J].河北工业大学学报, 2018, 47(1): 103-109.
[8]	Khalili A, Chua D K H.IFC-based framework to move beyond individual building elements toward configuring a higher level of prefabrication[J]. Journal of Computing in Civil Engineering, 2012, 27(3): 243-253.
[9]	Wang Z, Hao H. Dynamic response to demand variability for precast production rescheduling with multiple lines[J]. International Journal of Production Research, 2018, 1-16.
[10]	Ko C H, Wang S F. GA-based decision support systems for precast production planning[J]. Automation in Construction, 2010, 19(7): 907-916.
[11]	Ko C H, Wang S F. Precast production scheduling using multi-objective genetic algori-thms[J]. Expert Systems with Applications, 2011, 38(7): 8293-8302.
[12]	Li S H A, Tserng H P, yin S Y L, et al. A production modeling with genetic algorithms for a stationary pre-cast supply chain[J]. Expert Systems with Applications, 2010, 37(12): 8406-8416.
[13]	Chen J H, Yang L R, Tai H W. Process reengineering and improvement for building precast production[J]. Automation in Construction, 2016, 68: 249-258.
[14]	Wang Z, Hu H, Gong J.Framework for modeling operational uncertainty to optimize offsite production scheduling of precast components[J]. Automation in Construction, 2018, 86: 69-80.
[15]	徐照, 占鑫奎, 张星. BIM技术在装配式建筑预制构件生产阶段的应用[J].图学学报, 2018, 39(6): 136-143.
[16]	Bock T. Digital design and robotic production of 3D shaped precast components[C]//The 25th International Symposium on Automation and Robotics in Construction, Vilnius Lithuania. 2008, 11-21.
[17]	李永敢.装配式建筑预制混凝土构件自动化生产线设计配置技术[J].施工技术, 2018, 47(4): 47-51.
[18]	刘建波, 王佳佳, 张礼华, 等.基于现场总线的PC构件码垛养护控制系研究[J].制造业自动化, 2018, 40(9): 34-37.
[19]	Kim M K, Cheng J C P, Sohn H, et al. A framework for dimensional and surface quality assessment of precast concrete elements using BIm and 3D laser scanning[J]. Automation in Construction, 2015, 49: 225-238.
[20]	yin S Y L, Tserng H P, Wang J C, et al. Developing a precast production management system using RFID technology[J]. Automation in Construction, 2009, 18(5): 677-691.
[21]	马智亮, 杨之恬.基于BIM技术的预制构件生产管理系统框架研究[C].全国BIM学术会议, 2015.
[22]	董娜, 张宁, 赵雪媛, 等.基于BIM与RFID的工业化建筑构件进度管理研究[J].施工技术, 2018, 47(10): 5-10.
[23]	Ergen E, Akinci B, Sacks R. Tracking and locating components in a precast storage yard utilizing radio frequency identification technology and GPS[J]. Automation in construction, 2007, 16(3): 354-367.
[24]	Irizarry J, Karan E P, Jalaei F. Integrating BIm and GIS to improve the visual monitoring of construction supply chain management[J]. Automation in construction, 2013, 31: 241-254.
[25]	Im K S, Han S H, Koo B, et al.Formulation of a pull production system for optimal inventory control of temporary rebar assembly plants[J]. Canadian Journal of Civil Engineering, 2009, 36(9): 1444-1458.
[26]	Hong W K, Lee G, Lee S, et al. Algorithms for in-situ production layout of composite precast concrete members[J]. Automation in Construction, 2014, 41(5): 50-59.
[27]	周雅莉, 胡珉, 喻钢.基于IFC标准的隧道工程信息传递研究[J].土木建筑工程信息技术, 2015, 7(6): 1-4.
[28]	杨波.基于BIM的桥梁结构健康监测信息可视化研究[D].重庆交通大学, 2018.
[29]	Motamedi A, Soltani M M, Setayeshgar S, et al. Extending IFC to incorporate information of RFID tags attached to building elements[J]. Advanced Engineering Informatics, 2016, 30(1): 39-53.

信息技术在构件生产阶段的应用与展望

Application and Prospect of Information Technology in Component Manufacturing Stage

计量

作者相关

关键词相关

Figures And Tables