2016, 8(2): 60-65. doi: 10.16670/j.cnki.cnll—5823/tu.2016.02.10
装饰工程BIM模型的审核研究
中国建筑股份有限公司技术中心，北京 101300 |
A Study on the Evaluation of BIM Application in Decoration Engineering Projects
Technical Center of China State Construction Engineering Co., Ltd., Beijing 101300, China |
引用本文:
罗兰. 装饰工程BIM模型的审核研究[J]. 土木建筑工程信息技术,
2016, 8(2): 60-65.
doi: 10.16670/j.cnki.cnll—5823/tu.2016.02.10
Citation:
Luo Lan. A Study on the Evaluation of BIM Application in Decoration Engineering Projects[J]. Journal of Information Technologyin Civil Engineering and Architecture,
2016, 8(2): 60-65.
doi: 10.16670/j.cnki.cnll—5823/tu.2016.02.10
摘要:在装饰工程BIM应用的各个阶段，都有各参与方的不同岗位的人员对模型进行审核评价，形成审核报告及评价结果。在审核过程中，模型质量是BIM应用是否成功的一个极为关键的因素，然而迄今为止尚未见到国内装饰工程BIM应用的研究，实践中也没有建立相关评估标准。为此，作者对装饰工程不同阶段BIM模型的审核内容进行了梳理.提出四个审核原则：信息是否全面、数据是否准确、效果是否美观、方案是否优化。即：全不全、对不对、美不关.优不优：此外，本文还从这四个原则出发，总结出不同阶段的审核对象、内容、方法和标准供装饰工程各参与方参考。
Abstract: At different stages of BIM application in decoration engineering projects, professionals of different posts from concerning parties would review and evaluate the models, and they are expected to give final evaluation reports.In the process of eValuation, the quality of the model is the crucial factor to judge whether BIM application is successful or not.HoweVer, the author has not found any research concerning review of BIM application in decoration engineering projects in China, and its evaluation standards have not been established yet in practice. Therefore, this article makes an analysis on the contents concerning BIM models to be reviewed at different stages by different parties, and proposes 4 principles—sufficiency of information, accuracy of data, and attractiveness of design and optimization of scheme.In addition, this article makes a summary on the work items, contents, evaluating methods and standards at different stages, so that these could be used as a reference for different parties in decoration engineering projects.
| [1] |
罗兰, 赵静雅.装饰工程BIM应用流程初探-基于Revit的装饰模型建立和应用流程[J].土木建筑工程工程信息技术, 2013, 5(6): 81-88. |
| [2] |
罗兰.基于Revit的装饰工程BIM应用阻碍研究[J].土木建筑工程工程信息技术, 2015, 7(5): 68-73. |
| [3] |
罗兰, 王芳.某项目装饰工程基于Revit的BIM技术应用研究[J].土木建筑工程信息技术, 2014, 6(4): 55-61. |
| [4] |
罗兰, 钟凡.基于sketchup的装饰工程BIM技术应用研究[J].土木建筑工程信息技术, 2015, 7(2): 37-42. |
| [5] |
罗兰, 曾涛, 刘石, 杨昌中, 曹羽中.某装饰工程BIM技术应用实践经验总结[J].建筑技术开发, 2015, 42 (12): 16-20.doi: 10.3969/j.issn.1001-523X.2015.12.005 |
| [6] |
许可, 金锐, 张慧敏.浅谈BIM技术在会展工程中的应用[J].中国建筑装饰装修, 2015, 13, (7): 124-125. |
| [7] |
马智亮, 刘世龙, 张东东, 奚龚欣.基于BIM的毛石装饰墙虚拟砌筑系统研制[J].土木建筑工程信息技术, 2015, 7(2): 9-13. |
| [8] |
王廷魁, 杜长亮, 张巍, 陈珂.基于BIM的全装修房个性化设计研究[J].工程设计学报, 2013, 20(1): 44-48. |
| [9] |
李倩文, 李璞, 张旭光, 米广晓.基于BIM的建设工程消防设计审核策略[J].消防科学与技术, 2014, 33 (10): 1186-1188.doi: 10.3969/j.issn.1009-0029.2014.10.027 |
| [10] |
Maurice Murphy, Eugene McGovem, Sara Pavia.Historic building information modelling(HBIM)[J].Structural Survey, 2009, 27(4): 311-327.doi: 10.1108/02630800910985108 |
| [11] |
Raffaella Brumana. HBIM for Documentation, Dissemination and Management of Built Heritage The Case Study of St.Maria in Scariad'Intelvi[J].International Journal of Heritage in the Digital Era, 2013, 2(3): 433-452.doi: 10.1260/2047-4970.2.3.433 |
| [12] |
Asojo A O. An instructional design for Building Information Modeling (BIM) and Revit in interior design curriculum[J].Art, Design & Communication in Higher Educ"on, 2013, 11(2): 143-154. |
| [13] |
C Rudloff, TMatyus, SSeer.Developing Intelligent Interior Design Decoration Components by BIM Technologies [C].Springer International Publishing, HCI International 2014-Posters'Extended Abstracts-HCI International 2014. Heraklion, Crete, Greece, June 22.27, 2014.Proceedings, Pan I.2014.101-106. |
| [14] |
Jung J, Hong S, Jeong S, et al. Productive modeling for development of as-built BIM of existing indoor structures [J].Automation in constmction, 2014, 42(2): 68-77. |
| [15] |
Jimi Clarke. BIM Project Audit Checklist [DB/0L].http://forums.autodesk.com/t5/revit-architecture/bim-project-audit-checklist/td-p/3924852, 2013. |
| [16] |
Jungsik Choi, Inhan Kim. Development of Check-list for BIM Based Architectural Design Quality Check[J]. Transactions of the Society of CAD/CAM Engineers, 2013, 18(3): 177-188.doi: 10.7315/CADCAM.2013.177 |
计量
- PDF下载量(35)
- 文章访问量(1549)
- HTML全文浏览量(703)
